Integra DPS-10.5 instruction manual Setting the Speaker Distances, Buttons to select an option

Page 74

Configuring the DPS-10.5—Continued

5

Use the Up and Down [ ]/[

]

Remote controller

buttons to select Surround

 

Speaker, press the [Enter] but-

 

ton, use the Left and Right [

]/

Enter

[ ] buttons to select an option,

 

 

and then press the [Enter] but- ton.

Large: Select if the surround speakers are large.

Small (default): Select if the surround speakers are small.

Off: Select if no surround speakers are being used.

If the Subwoofer setting is set to Off, only the Large and Off options can be selected.

6

When you’ve finished, press the

 

 

[Setup] button to exit setup, or

Remote controller press the Left [] button repeat-

edly to go back to the main setup menu.

2

Remote controller

Enter

Use the Up and Down []/[ ] buttons to select each speaker, press the [Enter] button, use the Left and Right []/[ ] buttons to specify the distance from each speaker to the listening position, and then press the [Enter] but- ton.

Speaker distances can be specified in steps of 1.0 ft. (0.3 m).

(The North American model displays feet; other models display meters.)

Speaker

Range

Default

 

 

 

Front Left

 

 

 

 

12.0 ft.

Center

 

 

(3.6 m)

 

 

Front Right

 

 

 

 

1.0–30.0 ft.

 

Surround

 

(0.3–9 m)

7.0 ft.

Right

 

(2.1 m)

 

 

Surround Left

 

 

 

 

 

 

Subwoofer

 

12.0 ft.

 

(3.6 m)

 

 

 

 

 

Setting the Speaker Distances

Notes:

• If the distance between the furthest and nearest speakers is greater than 20 feet, corrected values suitable for home theater use will be set automat-

1

Remote controller

Enter

Use the Up and Down []/[ ] buttons to select Speaker Dis- tance, press the [Enter] button, use the Up and Down []/[ ] buttons to select On, and then press [Enter] again.

When the Speaker Distance is set to Off, these settings cannot be selected.

ically.

3

When you’ve finished, press the

 

 

[Setup] button to exit setup, or

Remote controller press the Left [] button repeat-

edly to go back to the main setup menu.

Note:

The Speaker Distance settings have no effect on SACD (multichannel area and 2-channel area) and 192 kHz/176.4 kHz DVD-Audio.

74

Image 74
Contents DPS-10.5 Important Safety Instructions Precautions For U.S. modelIf in any doubt, consult a qualified electrician PrecautionsFor models having a power cord with a polarized plug Never Touch this Unit with Wet Hands Moisture condensation may damage this unitContents Configuring the DPS-10.5 Important Safety Instructions PrecautionsInitial Setup Basic Playback SpecificationsDPS-10.5 Features IntroductionIntroduction Supplied AccessoriesPower-plug adapter CableSupported Discs Unsupported DVD FeaturesDisc Notes DVD-Video RegionsMP3 & Jpeg Compatibility Disc Content OrganizationVideo CDs Function SupportStoring Discs Cleaning DiscsHandling Discs CopyrightJpeg Joint Photographic Experts Group TerminologyHdmi High Definition Multimedia Interface MPEG2 Moving Picture Experts Group MPEG1 Moving Picture Experts GroupCompressed digital video format used for VCDs Vlsc Vector Linear Shaping CircuitryBefore Use Installing the Remote’s BatteriesUsing the Remote Controller Getting to Know the DPS-10.5 Front PanelGetting to Know the DPS-10.5 DisplayRear Panel IR IN/OUT Surr Mode Audio OUT switchSupplied power cord should be connected here MIX Audio OUT 27, 28Remote Controller Controlling the DPS-10.5 DVD ModePrevious/Next Setup buttonResolution button Pause buttonControlling an Integra AV Receiver Amp Mode Before Making Any Connections ConnectingAV Cables & Connectors Optical Digital OutputsConnecting Video Formats & DPS-10.5 Inputs & OutputsAudio Formats & DPS-10.5 Outputs DPS-10.5 audio output Disc type Audio formatGetting Connected Video Output ConnectionsUsing Composite Video Connecting a Standard TVUsing Component Video Using S-Video What is HDMI? Connecting an Hdtv or ProjectorConnecting a Component with an Hdmi Input Video Using HdmiHdmi & the DPS-10.5 Audio FormatsAV receiver Connecting an AV Receiver’s video InputsUsing Component Video What is i.LINK Audio? Connecting i.LINK-compatible ComponentsWhat is i.LINK? Using i.LINKDigital Audio Connection Dolby Digital & DTS Connecting to an AV Receiver’s Audio InputsConnecting Several i.LINK Components Link cablesAnalog Audio Connection Dolby Digital, DTS, DVD-Audio & Sacd Only one connection Digital ConnectionAnalog Connection Stereo ampSatellite/cable tuner, etc About the HD Component Video OUTCompatibility of this unit with progressive-scan TVs Controlling Components That Are Out of Range Connecting Components withControlling the DPS-10.5 When It’s Out of Range Integra AV receiverConnecting the Power Cord Controlling Other Out-of-range ComponentsTurning On the DPS-10.5 Turning On the DPS-10.5 with the Remote ControllerPress the DVD Mode button to select DVD mode Press the Standby/On buttonUse the Up and Down Initial SetupFirst Time Setup Then press EnterInitial Setup Basic Playback Loading DiscsStart To start playback, press the Play Button Starting, Pausing & Stopping PlaybackBasic Playback Pause To pause playback, pressPressing the Top Menu button Navigating Disc MenusLoad a DVD-Video disc or VCD Play the menuIfy a chapter or title number Selecting Chapters & Titles by NumberUse the number buttons to spec Load a DVD-Video discSelecting Tracks by Number Fast Forward & Reverse Frame-by-Frame PlaybackAdjusting the Display Brightness Slow-motion PlaybackNavigating MP3 Discs Viewing a Slideshow of Jpeg Images Making a Playlist with the Disc Navigator Top folder and press the Play To start the playlist, select anyItem in the Track list except To stop the playlist, pressTime Search Advanced PlaybackZooming Advanced Playback Repeat PlaybackLoad a disc To cancel random playback, use the Random button to selectRandom Playback OffPress the Enter button Remote controller the Play buttonMemory Playback Items to the Memory ListInserting New Items into the Memory List Deleting Items from the Memory ListSelecting Camera Angles Changing Items in the Memory ListSelecting Subtitles Selecting SoundtracksLast Memory Displaying Information2nd press Condition Onscreen DPS-10.5 Display Normal1st press 3rd pressCondition Onscreen DPS-10.5 Display VCD & CD4th press 1st pressbTurning Off the Video Circuits Setting the Hdmi Output ResolutionSelecting the Video Input Source Press the remote controller’s Using the Picture Control MenuSetting the Picture’s Aspect Ratio Remote controller The Picture Control menu appearsLanguage Menu Setting Description PictureConfiguring the DPS-10.5 Operation Menu Setting Description DisplayConfiguring the DPS-10.5 Using the Onscreen Setup Menus Blank screen Following diagram showsConfiguring theDPS Arrow buttonTV Shape Interlaced SettingPicture Menu Selecting the Interlaced Setting Progressive SettingDigital Out/Digital1 i.LINK PAL Output Setting Australian model onlyAudio Menu Linear PCM Out Link Output SettingDigital Out/Digital2 Hdmi Digital 2 Audio OUTs are onAnalog Audio Out Multi Channel defaultTest tone is used to adjust the level of each speaker see ChannelSetting the Speaker Settings Setup button to exit setup, or Setting the Speaker DistancesSmall default Select if the surround speakers are small Buttons to select an optionSelecting the AV Synchronization Setting Levels With the Test ToneAV Synchronization Buttons to select Test Tone,Buttons to set the delay time Sacd Audio SetupCD Audio Setup Remote controller The settings are storedDisc Menu Language Language MenuOn-Screen Language Audio LanguageDisplay Menu Operation MenuRemote Confirmation Remote controller The Security Code box appearsParental Lock Select Parental Lock-On,Auto power off Initial Setup MenuPriority Contents Selecting Other LanguagesLanguage Code Language Code ListUse this list when specifying other languages Entering Remote Control Codes Controlling Other ComponentsRemote Control Codes Controlling Other ComponentsRCA Noblex Controlling a TV Press the TV Mode buttonPress the VCR Mode button Controlling a VCRLearning the Commands of Other Remote Controllers ModeDeleting the Learnt Commands of One Mode Deleting the Learnt Commands of All ModesTroubleshooting Symptom Possible cause RemedyAbnormal Behavior TroubleshootingRestoring the Default Settings Specifications and features subject to change without notice Specifications3 4 3 6 5