Integra DPS-10.5 Digital Connection, Analog Connection, Only one connection, Stereo amp

Connecting—Continued

Connecting a Stereo Amp M. Digital Connection

This section explains how to connect the DPS-10.5 to a stereo hi-fi amp or receiver for sound quality better than that provided by most TVs. This is great for listening to your CDs and MP3s. DVD-Video discs and VCDs will sound better too. You can also enjoy Dolby Surround, if your receiver supports Dolby Pro Logic.

L. Analog Connection

Use an RCA audio cable to connect the DPS-10.5’s D.MIX AUDIO OUT to a stereo analog audio input on your amp or receiver.

Use an optical or coaxial digital audio cable to connect one of the DPS-10.5’s DIGITAL 1 or DIGITAL 2 out- puts (OPTICAL or COAXIAL) to a corresponding digi- tal audio input on your amp or receiver.

COAXIAL Only one connection OPTICAL

required! Choose

coaxial or optical

D. MIX

L

R

AUDIO OUT

RL

AUDIO IN

Signal flow

Stereo amp

Notes:

•See the table on page 25 for details on how the DPS-10.5 outputs audio from the D.MIX AUDIO OUT.

COAXIAL IN OPTICAL IN

Signal flow

Stereo amp

Notes:

•Be sure to configure the digital output (Digital 1 Out or Digital 2 Out) for PCM (see page 70). Otherwise an unpleasant digital noise may be heard, which may damage your equipment.

•The DPS-10.5 doesn’t support AC-3RF, so don’t con- nect it to the AC-3RF input on a Dolby Digital receiver.

•See the table on page 25 for details on how the DPS-10.5 outputs audio from the DIGITAL AUDIO OUTs.

34