Integra DPS-10.5 instruction manual Selecting the Interlaced Setting, Progressive Setting

Configuring the DPS-10.5—Continued

On	Standby	TV
	I	Input

	1		2	3	+
					TV CH
	4		5	6	-
	7		8	9
					TV VOL
	+10		0	Clear
	Search	Memory Dimmer			Amp Input
	S		M	D	Input
			Amp Input
	DVD		V1	V 2	V3
			Mode
	DVD		Amp	VCR	TV
	Zoom On				Picture Control
Enter			enu	M
	Audio	opM		enu
	Sel	T
	+
	CH
	Zoom		Enter		VOL
	L Mode
	-
		R	eturn	p
				Setu		Setup
	Display				Muting
	Last Memory		Step/Slow		Random
	Rec LM				RD
	Audio	Subtitle		Angle	Resolution
	Audio	Subtitle		Angle	Rsltn
	Repeat		A-B		Aspect
	Repeat		A-B		Aspect
	Video Input	Video Off		Learning

Selecting the Interlaced Setting

1

Remote controller

Enter

or

Enter	Select Interlaced Setting 1, 2, or
	3, and then press the [Enter] or
	Right [ ] button.
	The parameters appear onscreen.
2	Use the Up and Down [ ]/[	]
Remote controller	buttons to select the parameters,
	press the [Enter] button, and
	then use the Left and Right [	]/
Enter	[ ] buttons to set them.

3	Press the [Enter] button.
Remote controller	The setting is stored.
	Use the same procedure to set the other
	parameters, pressing the [Enter] button
	when you’ve set each one.
	Press the [Setup] button to exit the
	onscreen setup menu.

Progressive Setting

With this setting you can adjust various picture parame- ters for progressive scanning. There are three setup memories (1, 2, 3) for storing your favorite settings. You could, for example, use one for daytime viewing (e.g., sun shining through window) and one for nighttime viewing (e.g., curtains drawn, lights down).

Parameter	Range	Description
Contrast	–7...0...+7	Adjusts the picture con-
		trast.
Brightness	–7...0...+7	Adjusts the picture
		brightness.
Color	–7...0...+7	Adjusts the picture
		color.
Tint	–7...0...+7	Adjusts the picture tint.
Sharpness	–7...0...+7	Adjusts the picture
		sharpness.
Gamma	–7...0...+7	Adjusts the brightness
		of darker colors.
Y/C Time	–4...0...+4	Corrects small shifts in
Correction		color.

1

Remote controller

Enter

or

Enter

Select Progressive Setting 1, 2, or 3, and then press the [Enter] or Right [ ] button.

The parameters appear onscreen.

2	Use the Up and Down [ ]/[	]
Remote controller	buttons to select the parameters,
	press the [Enter] button, and
	then use the Left and Right [	]/
Enter	[ ] buttons to set them.

69