Integra DPS-10.5 Speciﬁcations and features subject to change without notice

Page 91

Speciﬁcations

	Signal	North American models:	NTSC
	System	Australian models:	PAL/NTSC

	Composite Video Output/Impedance		1.0 V(p-p)/75 Ω negative sync, RCA/phono

	S-Video Output/Impedance		Y: 1.0 V(p-p)/75 Ω negative sync, 4-pin mini DIN

			C: 0.286 V(p-p)/75 Ω
			C: 0.286 V(p-p)/75 Ω

	Component Video Output/Impedance		Y: 1.0 V(p-p)/75 Ω

			PB/PR: 0.7 V(p-p)/75 Ω, RCA/phono, BNC
			PB/PR: 0.7 V(p-p)/75 Ω, RCA/phono, BNC

		DVD Audio	4 Hz–88 kHz (192 kHz)

	Frequency	DVD Linear Sound	4 Hz–44 kHz (96 kHz)
	Response	DVD Linear Sound	4 Hz–22 kHz (48 kHz)
	Response		4 Hz–22 kHz (48 kHz)

		Audio CD	4 Hz–20 kHz (44.1 kHz)

	S/N Ratio		112 dB

	Audio Dynamic Range		106 dB

	THD (Total Harmonic Distortion)		0.002 % (1 kHz)

	Wow and Flutter		Below threshold of measurability

	AudioOutput(Digital/Optical)		–22.5 dBm

	AudioOutput/Impedance (Digital/Coaxial)		0.5V p-p / 75 Ω

	AudioOutput/Impedance (Analog)		2.0 V(rms) / 320 Ω

	HDMI socket (HDMI OUT)		19-pin

	i.LINK socket		4-pin (S400)

	Power	North American models:	AC 120 V, 60 Hz
	Supply	Australian models:	AC 230-240 V, 50 Hz

	Power Consumption		48 W

	Stand-by Power Consumption		7.1 W

	Dimensions (W x H x D)		435 W x 123 H x 376 D mm
	Dimensions (W x H x D)		17. 1/8 W x 4. 13/16 H x 14. 13/16 D inches
			17. 1/8 W x 4. 13/16 H x 14. 13/16 D inches

	Weight		12.1 kg
	Weight		26.7 lbs
			26.7 lbs

	Operation Condition Temperature		5 ˚C – 35 ˚C (41 F – 95 F)

			DVD-Video, DVD-Audio, SACD, DVD-R (Video Mode), DVD-RW
	Disc Compatibility		(Video Mode/VR mode), Music CD/CD-R/RW, Video CD, MP3, JPEG
	Disc Compatibility		Disc that has not been property ﬁnalized may only be partially play-

			able or not playable at all.

Speciﬁcations and features subject to change without notice.

91

Image 91

Contents DPS-10.5 Important Safety Instructions For U.S. model PrecautionsFor models having a power cord with a polarized plug PrecautionsIf in any doubt, consult a qualiﬁed electrician Moisture condensation may damage this unit Never Touch this Unit with Wet HandsContents Specifications Important Safety Instructions PrecautionsInitial Setup Basic Playback Configuring the DPS-10.5Introduction DPS-10.5 FeaturesCable Supplied AccessoriesPower-plug adapter IntroductionDVD-Video Regions Unsupported DVD FeaturesDisc Notes Supported DiscsFunction Support Disc Content OrganizationVideo CDs MP3 & Jpeg CompatibilityCopyright Cleaning DiscsHandling Discs Storing DiscsHdmi High Deﬁnition Multimedia Interface TerminologyJpeg Joint Photographic Experts Group Vlsc Vector Linear Shaping Circuitry MPEG1 Moving Picture Experts GroupCompressed digital video format used for VCDs MPEG2 Moving Picture Experts GroupUsing the Remote Controller Installing the Remote’s BatteriesBefore Use Front Panel Getting to Know the DPS-10.5Display Getting to Know the DPS-10.5Rear Panel MIX Audio OUT 27, 28 Surr Mode Audio OUT switchSupplied power cord should be connected here IR IN/OUTControlling the DPS-10.5 DVD Mode Remote ControllerPause button Setup buttonResolution button Previous/NextControlling an Integra AV Receiver Amp Mode Optical Digital Outputs ConnectingAV Cables & Connectors Before Making Any ConnectionsVideo Formats & DPS-10.5 Inputs & Outputs ConnectingDPS-10.5 audio output Disc type Audio format Audio Formats & DPS-10.5 OutputsVideo Output Connections Getting ConnectedUsing Component Video Using S-Video Connecting a Standard TVUsing Composite Video Connecting a Component with an Hdmi Input Connecting an Hdtv or ProjectorWhat is HDMI? Audio Formats Using HdmiHdmi & the DPS-10.5 VideoUsing Component Video Connecting an AV Receiver’s video InputsAV receiver Using i.LINK Connecting i.LINK-compatible ComponentsWhat is i.LINK? What is i.LINK Audio?Link cables Connecting to an AV Receiver’s Audio InputsConnecting Several i.LINK Components Digital Audio Connection Dolby Digital & DTSAnalog Audio Connection Dolby Digital, DTS, DVD-Audio & Sacd Stereo amp Digital ConnectionAnalog Connection Only one connectionCompatibility of this unit with progressive-scan TVs About the HD Component Video OUTSatellite/cable tuner, etc Integra AV receiver Connecting Components withControlling the DPS-10.5 When It’s Out of Range Controlling Components That Are Out of RangeControlling Other Out-of-range Components Connecting the Power CordPress the Standby/On button Turning On the DPS-10.5 with the Remote ControllerPress the DVD Mode button to select DVD mode Turning On the DPS-10.5Then press Enter Initial SetupFirst Time Setup Use the Up and DownInitial Setup Loading Discs Basic PlaybackPause To pause playback, press Starting, Pausing & Stopping PlaybackBasic Playback Start To start playback, press the Play ButtonPlay the menu Navigating Disc MenusLoad a DVD-Video disc or VCD Pressing the Top Menu buttonLoad a DVD-Video disc Selecting Chapters & Titles by NumberUse the number buttons to spec Ify a chapter or title numberSelecting Tracks by Number Frame-by-Frame Playback Fast Forward & ReverseSlow-motion Playback Adjusting the Display BrightnessNavigating MP3 Discs Viewing a Slideshow of Jpeg Images Making a Playlist with the Disc Navigator To stop the playlist, press To start the playlist, select anyItem in the Track list except Top folder and press the PlayZooming Advanced PlaybackTime Search Repeat Playback Advanced PlaybackOff To cancel random playback, use the Random button to selectRandom Playback Load a discItems to the Memory List Remote controller the Play buttonMemory Playback Press the Enter buttonDeleting Items from the Memory List Inserting New Items into the Memory ListChanging Items in the Memory List Selecting Camera AnglesSelecting Soundtracks Selecting SubtitlesDisplaying Information Last Memory3rd press Condition Onscreen DPS-10.5 Display Normal1st press 2nd press1st pressb VCD & CD4th press Condition Onscreen DPS-10.5 DisplaySelecting the Video Input Source Setting the Hdmi Output ResolutionTurning Off the Video Circuits Remote controller The Picture Control menu appears Using the Picture Control MenuSetting the Picture’s Aspect Ratio Press the remote controller’sConﬁguring the DPS-10.5 Menu Setting Description PictureLanguage Conﬁguring the DPS-10.5 Menu Setting Description DisplayOperation Using the Onscreen Setup Menus Arrow button Following diagram showsConﬁguring theDPS Blank screenPicture Menu Interlaced SettingTV Shape Progressive Setting Selecting the Interlaced SettingAudio Menu PAL Output Setting Australian model onlyDigital Out/Digital1 i.LINK Digital 2 Audio OUTs are on Link Output SettingDigital Out/Digital2 Hdmi Linear PCM OutChannel Multi Channel defaultTest tone is used to adjust the level of each speaker see Analog Audio OutSetting the Speaker Settings Buttons to select an option Setting the Speaker DistancesSmall default Select if the surround speakers are small Setup button to exit setup, orButtons to select Test Tone, Setting Levels With the Test ToneAV Synchronization Selecting the AV SynchronizationRemote controller The settings are stored Sacd Audio SetupCD Audio Setup Buttons to set the delay timeAudio Language Language MenuOn-Screen Language Disc Menu LanguageOperation Menu Display MenuSelect Parental Lock-On, Remote controller The Security Code box appearsParental Lock Remote ConﬁrmationSelecting Other Languages Initial Setup MenuPriority Contents Auto power offUse this list when specifying other languages Language Code ListLanguage Code Controlling Other Components Entering Remote Control CodesControlling Other Components Remote Control CodesRCA Noblex Controlling a VCR Press the TV Mode buttonPress the VCR Mode button Controlling a TVMode Learning the Commands of Other Remote ControllersDeleting the Learnt Commands of All Modes Deleting the Learnt Commands of One ModeSymptom Possible cause Remedy TroubleshootingRestoring the Default Settings TroubleshootingAbnormal Behavior Speciﬁcations Speciﬁcations and features subject to change without notice3 4 3 6 5