Integra DPS-10.5 instruction manual Initial Setup

Initial Setup—Continued

5	Press the [Enter] button, use the
	Up and Down [ ]/[ ] buttons to

Remote controller select On or Off, and then press

the [Enter] button.

Enter

Choose Off if your multichannel amp has its own speaker setup function.

Choose On if your multichannel amp has no speaker setup function.

If you select Off, the following settings cannot be set and the Initial Setup menu closes. If you select On, the Speaker Setting menu appears.

Here you can specify the size of the speakers being fed from the FRONT, SURR 1/SURR 2, CENTER, and SUBWOOFER AUDIO OUTPUTs.

For speakers with a cone diameter larger than 6-1/2 inches (16 cm), spec- ify Large. For those with a smaller diameter, specify Small. See page 72 for more information.

6 Press the [Enter] button, use the

Left and Right []/[ ] buttons to Remote controller set the Subwoofer setting, and

	then press [Enter] again.
	Off: Select if no subwoofer is being
Enter	used.
	On (default): Select if a subwoofer is
	being used.

8	Use the Left and Right [ ]/[ ]
Remote controller	buttons to set the Center Speaker
	setting, and then press the
	[Enter] button.
Enter	Large: Select if the center speaker is
	large.

Small (default): Select if the center speaker is small.

Off: Select if no center speaker is being used.

Note that if the Front Speaker Size is set to Small, the Large option cannot be selected.

9	Use the Left and Right [ ]/[ ]
Remote controller	buttons to set the Surround
	Speaker setting, and then press
	the [Enter] button.
Enter	Large: Select if the surround speakers
	are large.
	Small (default): Select if the surround
	speakers are small.
	Off: Select if no surround speakers are
	being used.
	The Initial Setup menu closes and the
	setup is complete.
	The DPS-10.5 is now ready for use. See
	page 41 for information on playing
	discs.

Notes:

•	You can change the language of the onscreen setup
	menus, and specify your preferred languages for DVD
	menus, soundtracks, and subtitles on the Language
	menu (see page 77).
•	When a DVD doesn’t have menus, soundtracks, and
	subtitles in different languages, its default language is
	used.
• When the DPS-10.5 is plugged in and set to Standby,
	it automatically checks if it’s connected to any other

7

Remote controller

Enter

Use the Left and Right []/[ ] buttons to set the Front Speaker setting, and then press the [Enter] button.

Large: Select if the front speakers are large.

Small (default): Select if the front speakers are small.

Note that if the Subwoofer setting is set to Off, this setting is fixed at Large.

i.LINK components. If it is, the default setting for the

i.LINK Output Setting becomes On. If not, the default

becomes Off.

40