Integra Audio Formats & DPS-10.5 Outputs, DPS-10.5 audio output Disc type Audio format

Connecting—Continued

Audio Formats & DPS-10.5 Outputs

The DPS-10.5 supports many digital audio formats. The following table shows which outputs work with each format.

				DPS-10.5 audio output
Disc type	Audio format	HDMI OUT	i.LINK	DIGITAL 1 & 2	FRONT, SURR 1, CENTER,	D.MIX
		(digital)a	(digital)b	AUDIO OUT	SUBWOOFER, SURR 2	AUDIO OUT
				c	d	e
				(digital)	(analog)	(analog)
	PCM	✓f	✓g	✓h	✓i	✓
DVD-Video	Dolby Digital	✓j	✓	✓	✓k	✓
	DTS	✓j	✓	✓	✓	✓
	MPEGl	✓j	✓	✓	✓	✓
	PCM	✗	✓	✓n, h	✓	✓
DVD-Audiom	Dolby Digital	✗	✓	✓o	✓	✓
	DTS	✗	✓	✓o	✓	✓
	MPEG	✗	✓	✓o	✓	✓
	Stereo area	✗	✓q	✗	✓	✓
SACDp	Multichannel area	✗	✓q	✗	✓	✓
	Hybrid disc CD layer	✓	✓	✓	✓	✓
VCD	MPEG1	✓	✓	✓	✓	✓
CD	PCM	✓	✓	✓h	✓i	✓
	DTS	✓j	✓	✓	✓	✓
MP3	MP3	✓	✓	✓	✓	✓

a.The Digital Out/Digital 2 settings apply to the HDMI OUT (see page 71). Components must support HDCP (High-bandwidth Digital Content Protection) in order to play DVD-Video. The DPS-10.5 does.

b.The Digital Out/Digital 1 settings apply to the i.LINK sockets (see page 70). Components must support DTCP (Digital Transmission Content Protection) in order to play DVD-Video, DVD-Audio, and SACD. The DPS-10.5 does.

c.If the Digital Out setting is set to Off, nothing is output by these outputs (see page 70).

d.2-channel stereo sources are output only by the FRONT AUDIO OUT sockets. For multichannel sources, the Downmix Setting determines how the FRONT AUDIO OUT sockets work (see page 72).

e.2-channel sources, including Dolby Surround, are output as they are. Multichannel sources are down mixed.

f.To output PCM at sampling rates other than 44.1 kHz and 48 kHz, set the Linear PCM Out setting to Down Sample On (see page 71).

g.Protected high sampling rate digital audio (96 kHz) will be down sampled to 48 kHz.

h.You can choose whether or not to downsample 96 kHz audio to 48 kHz (see page 71).

i.Set the Dolby Pro Logic setting to On to add surround sound (see page 72).

j.To use with an HDMI TV that does not support this format, set the appropriate Digital Out/Digital 2 setting (i.e., Dolby Digital Out, DTS Out, or MPEG Out) to downmix to PCM (see page 71).

k.Set the Dolby Pro Logic setting to Auto or On to decode Dolby Surround material. Set it to On to add surround sound to 2-channel Dolby Digital material (see page 72).

l.Only the 2-channel audio information is used.

m.High sampling rate DVD-Audio (192 kHz/176 kHz) will be down sampled to 96 kHz, 88.2 kHz, 48 kHz, or 44.1 kHz depending on the disc.

n.Some DVD-Audio discs may not allow PCM output from the DIGITAL 1/2 AUDIO OUTs.

o.Multichannel DVD-Audio will be down mixed to stereo.

p.By default the DPS-10.5 plays the multichannel area, although you can change this (see page 76).

q.When the i.LINK Output Setting is set to On, SACD audio is output from the i.LINK sockets, but not the analog audio outputs. When it’s set to Off, SACD audio is output from the analog audio outputs, but not the i.LINK sockets (see page 71).

25