Samsung SHR-8080, SHR-7082, SHR-7080, SHR-7160, SHR-8162, SHR-8160 Connecting the RS-485 Device

connecting with other device

Connecting the RS-485 Device

Connect the RS-485 device through the back port.

M	` For example, you can connect and control the PTZ
	camera which supports the RS-485
	communication.

~Transfer Type : You may select either Half Duplex or Full Duplex as the data transfer type.

~Baud Rate : Supported Baud rates are 600/1200/2400/ 4800/9600/19200/38400.

M	` Check if the RS-485 device is compatible with the
	product first.

`Pay attention not to change the polarity (+/-) of the RS-485 device when connecting it.

`Depending on camera’s type, connection polarity can be different.

For further information, refer to the respective PTZ Camera’s documentation.

`Ex : DVR(TX+/-)  SCC-C6433,35(RX+/-)

DVR(TX+/-)  SCC-C6403,07(TX+/-)

PTZ device

Half Duplex Type

Data (–)

Data (+)

Full Duplex Type

Rx(+)

Rx(–)

Tx(–)

Tx(+)

Rear

Tx(–)

Tx(+)

Rx(–)

Rx(+)

22_ connecting with other device

00769B_SHR-8162_ENG-NEW.indb 22

2008-12-04 오전 10:14:30