Samsung SHR-7082, SHR-7080, SHR-7160, SHR-8162 Searching the recorded video in the caLendar

Page 80

web viewer

searching the recorded video in the caLendar

If the video data has been recorded on a date, the date is distinguished in green. If you click the date, the recorded video information is displayed in the time line. When you click <today>, it is changed to today’s date.

searching the recorded video in the timeLine

It displays the recorded video data status on the DVR after a date is selected. The normal mode displays the time ranging from 0 to 24 Hours while the extension mode displays the time every 2 hours.

[Normal Mode]

~If you click < > button, it changes to the extension mode.

~Each time line represents 1 hour.

[Extension Mode]

~If you click < > button, it changes to the normal mode.

~Each time line represents 5 minutes.

M ` The channels are ranging from CH01 to CH16.

0_ web viewer

00769B_SHR-8162_ENG-NEW.indb 80

 

 

2008-12-04 오전 10:16:37

 

 

 

 

 

 

 

 

Image 80
Contents Channel/16 Channel DVR Features OverviewImportant Safety Instructions Overview~ Continuous standard load 0.2mA ~ Operating temperature -20C ~ +85C~ Normal capacity 170mAh Package Contents Standards ApprovalsContents Appendix Backup viewerWeb viewer Part Names and Functions Front Alarm RECMode AudioPart Names and Functions Rear 7080/7082 RearVideo OUT Audio OUTVGA HdmiRemote Control Using the numeric buttonsChannel Press each button between 1 toChanging the Remote Control ID Press any button among 1 toInstallation ChecKing the instaLLation environmentRacK instaLLation InstaLLationHdd addition ` Fix the screws not to be loosened by vibrations` For SHR-7082/7162/8082/8162 models, see the following Adding a hddIf adding hdds to shr-7080, 7160, 8080 If adding hdds to shr-7082, 7162, 8082 Installed by default Connecting the Video, Audio, and Monitor Connecting the NetworkConnecting to Internet through Ethernet 10/100/1000BaseT ` The following figures are based on Model SHR-8162Connecting to Internet through Adsl Connecting the USBConnecting External Sata HDD Connecting POS Device Connecting the Alarm Input/OutputConnecting the RS-485 Device Shutting down the system Getting startedStarting the system Login Fi gureLive Screen Configuration Icons on the Live ScreenError information Split mode menuSplit Mode Menu Single Mode MenuSingle mode menu ZoomView the Launcher menu PTZLive Mode Switching the screen modeSwitching the split mode Auto SequenceChannel Setting Manual SwitchingSpot out Selecting a spot out modeSwitching to single mode Audio on/oFF in single mode ZoomAudio on/oFF FreeZeEvent Monitoring Date/time/Language System setupSetting the date/time/Language Setting holiday Using the calendarSetting the administrator You can set and change Administrator’s ID and password. When the administrator setup is done, press oK Permission managementSetting the group Setting the userSetting permissions System managementChecking the system information System ManagementUsing the dvr System Upgrade BroadcastS/W Upgrade ~ Updating the SoftwareSystem Log SettingsLog information Setting the device Setting the cameraCamera Event LogSetting the ptZ . When the PTZ setup is done, press oKFormatting Storage deviceConfi rming devices Hdd alarm HDD AlarmAppears on the Live screen ManageRemote devices Pos devicesWill not be saved Remote DeviceSetting the monitor MonitorSetting the spot out Setting the screen modeSetting the recording Recording scheduleRecord Recording ScheduleQuality / resolution Setting standard recording propertiesEvent record duration Recording color tagsRecord option Setting event recording propertiesResolution Setting the event Sensor detectionNormal close Sensor is closed EventSetting the motion detection area Motion detectionMotion Detection Sensor DetectionAlarm schedule Stop the alarm by canceling the schedule. When the Alarm Schedule setup is done, press oK Alarm ScheduleBacKup Setting the BackupYou can backup the desired data to a connected device BackupNetworK conFiguration Connection modeSetting the connection You can set the network connection route and protocolSetting the protocol ProtocolConnecting and setting the network When no router is used~ dynamic ip dhcp mode DdnsNetwork When a router is used192.168.0.254 Live Transfer Ddns settingLive transfer Mailing service Smtp settingEvent setting Mailing ServiceGroup setting Recipient settingUsingthe GroupAdd UserUsing the ptZ camera ControLLing a ptZ devicePtZ device Getting started with ptZPreset setting Camera setting. Press oK Preset will be saved as a name that you entered AccordinglyIt does not appear in Backup Search SearchTime search You can search for recorded data of a desired timeBackup search Event searchPos search Motion searchPOS Search Motion SearchPlay Backup RangePLayBacK What is Web Viewer? Introducing Web Viewer. Click install activex control… WeB viewer Connecting weB viewer` All settings are applied by the DVR’s settings 0 web viewer Using Live viewer You can change the split mode by clicking each number icon Single Mode Quad Mode Nine ModeOsd inFormation dispLay SpLit-screen` The number of simultaneous connections are limited to Changing the Live screen modeConnected dvr It cannot be modified Saving the Live screen on the pc~ capture Saves the current screen into a BMP or Jpeg fi le Using ptZ camera Changing the Live screen channeLEx Samsung SCC-C6475 ` Tilt of Power PTZ operates properly withinPan/Tilt of the Smart dome camera is manipulated Using search viewer Single Mode Sixteen ModeWeb Viewer\VideoClip\Search. To change the saving path Searching the recorded video in the caLendar Searching the recorded video in the timeLineViewer setup You can confi gure the various settings of the DVR systemSystem ControLLing pLayBacKHoliday Permission managementSystem management Storage device DeviceCamera Monitor Remote devicePos device For more information, refer to setting the recording. RecordRecording schedule ~ Spot OUTRec Quality & resolution EventEvent record duration Record optionAlarm schedule You can set the alarm output time if a video loss occursMotion detection Video Loss detectionNetwork ConnectionDdns Live transferMailing service ABout Sec BacKup viewer Recommended system requirementsYou can adjust the volume level from 0 to Speed will restore toBetween activated and deactivated BMP and JpegProduct Specification PALCifs USB HDDSata HDD AppendixSata HDD-MAX Product OVERView ~ SHR-8162Default Setting ManagementDuration Smtp Troubleshooting DVR Preamble We protect your rights with two stepsOn the Program is not required to print an announcement No Warranty How to Apply These Terms to Your New Programs END of Terms and ConditionsTerms and Conditions Appendix English Additional Terms Patents No Surrender of Others FreedomEND of Terms and Conditions Revised Versions of this LicenseLimitation of Liability Do these things Is included without limitation in the term modification English Promoting the sharing and reuse of software generally How to Apply These Terms to Your New Libraries Copyright C year name of authorOpenSSL License Loss of USE, DATA, or Profits or Business InterruptionThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product