Samsung SHR-8162, SHR-7082, SHR-7080, SHR-7160, SHR-8160 Live transfer, Ddns setting, Live Transfer

Page 59

ddns setting

DDNS is a short form of Dynamic Domain Naming System.

DNS (Domain Name System) is a service that routes a domain name consisting of user friendly characters (ex: www.google.com) to an IP address consisting of numbers (64.233.189.104).

DDNS (Dynamic DNS) is a service that registers a domain name and the fl oating IP address with the DDNS server so that the domain name can be routed to the IP address even if the IP is changed in a dynamic IP system.

~setting ddns in the dvr

Set <protocol type> in the <protocol> menu of the connected DVR to the following:

Ex) Protocol Type : TCP

Port (TCP) : 0554,0555,0556,0557

DDNS Site : Samsung DDNS

~ddns settings of the router

Select the corresponding menu for the network transfer protocol of the router.

Live transfer

Sets the quality of the image that is transferred from the DVR to the network.

Using the mouse may help easy setup.

● using the dvr

.In the <network> setting window, press the up/down (▲▼) button to move to <Live transfer> and press the [enter] button.

The Live Transfer window appears.

.Use the direction buttons (▲▼_ +) to move to a desired item and set the value.

.When the live transfer is done, press <oK>.

`For the resolution of the live transfer, refer to “Resolution”. (Page 50)

Live Transfer
 Resolution	CIF(S)
 Quality	Low
	OK	Cancel

M ` For SHR-7080,7082,7160 and 7162, only Half D1(M) or lower is available.

English _9

00769B_SHR-8162_ENG-NEW.indb 59

2008-12-04 오전 10:15:53

Image 59

Contents Channel/16 Channel DVR Overview FeaturesOverview Important Safety Instructions~ Continuous standard load 0.2mA ~ Operating temperature -20C ~ +85C~ Normal capacity 170mAh Standards Approvals Package ContentsContents Appendix Backup viewerWeb viewer Part Names and Functions Front Audio AlarmREC Mode7080/7082 Rear Part Names and Functions RearHdmi Video OUTAudio OUT VGAPress each button between 1 to Remote ControlUsing the numeric buttons ChannelPress any button among 1 to Changing the Remote Control IDChecKing the instaLLation environment Installation` Fix the screws not to be loosened by vibrations RacK instaLLationInstaLLation Hdd addition` For SHR-7082/7162/8082/8162 models, see the following Adding a hddIf adding hdds to shr-7080, 7160, 8080 If adding hdds to shr-7082, 7162, 8082 Installed by default ` The following figures are based on Model SHR-8162 Connecting the Video, Audio, and MonitorConnecting the Network Connecting to Internet through Ethernet 10/100/1000BaseTConnecting to Internet through Adsl Connecting the USBConnecting External Sata HDD Connecting the Alarm Input/Output Connecting POS DeviceConnecting the RS-485 Device Shutting down the system Getting startedStarting the system Fi gure LoginIcons on the Live Screen Live Screen ConfigurationSingle Mode Menu Error informationSplit mode menu Split Mode MenuZoom Single mode menuPTZ View the Launcher menuAuto Sequence Live ModeSwitching the screen mode Switching the split modeManual Switching Channel SettingSpot out Selecting a spot out modeSwitching to single mode FreeZe Audio on/oFF in single modeZoom Audio on/oFFEvent Monitoring Date/time/Language System setupSetting the date/time/Language Using the calendar Setting holidayPermission management Setting the administratorYou can set and change Administrator’s ID and password . When the administrator setup is done, press oKSetting the user Setting the groupSystem Management Setting permissionsSystem management Checking the system information~ Updating the Software Using the dvrSystem Upgrade  BroadcastS/W UpgradeSystem Log SettingsLog information Event Log Setting the deviceSetting the camera Camera. When the PTZ setup is done, press oK Setting the ptZFormatting Storage deviceConfi rming devices Manage Hdd alarmHDD Alarm Appears on the Live screenRemote Device Remote devicesPos devices Will not be savedMonitor Setting the monitorSetting the screen mode Setting the spot outRecording Schedule Setting the recordingRecording schedule RecordRecording color tags Quality / resolutionSetting standard recording properties Event record durationRecord option Setting event recording propertiesResolution Event Setting the eventSensor detection Normal close Sensor is closedSensor Detection Setting the motion detection areaMotion detection Motion DetectionAlarm Schedule Alarm scheduleStop the alarm by canceling the schedule . When the Alarm Schedule setup is done, press oKBackup BacKupSetting the Backup You can backup the desired data to a connected deviceYou can set the network connection route and protocol NetworK conFigurationConnection mode Setting the connectionProtocol Setting the protocolDdns Connecting and setting the networkWhen no router is used ~ dynamic ip dhcp modeNetwork When a router is used192.168.0.254 Live Transfer Ddns settingLive transfer Mailing Service Mailing serviceSmtp setting Event settingGroupAdd User Group settingRecipient setting UsingtheGetting started with ptZ Using the ptZ cameraControLLing a ptZ device PtZ deviceAccordingly Preset settingCamera setting . Press oK Preset will be saved as a name that you enteredYou can search for recorded data of a desired time It does not appear in Backup SearchSearch Time searchEvent search Backup searchMotion Search Pos searchMotion search POS SearchPlay Backup RangePLayBacK Introducing Web Viewer What is Web Viewer?. Click install activex control… WeB viewer Connecting weB viewer` All settings are applied by the DVR’s settings 0 web viewer Using Live viewer SpLit-screen You can change the split mode by clicking each number iconSingle Mode Quad Mode Nine Mode Osd inFormation dispLay` The number of simultaneous connections are limited to Changing the Live screen modeConnected dvr It cannot be modified Saving the Live screen on the pc~ capture Saves the current screen into a BMP or Jpeg fi le Changing the Live screen channeL Using ptZ cameraEx Samsung SCC-C6475 ` Tilt of Power PTZ operates properly withinPan/Tilt of the Smart dome camera is manipulated Using search viewer Sixteen Mode Single ModeWeb Viewer\VideoClip\Search. To change the saving path Searching the recorded video in the timeLine Searching the recorded video in the caLendarControLLing pLayBacK Viewer setupYou can confi gure the various settings of the DVR system SystemPermission management HolidaySystem management Storage device DeviceCamera Monitor Remote devicePos device ~ Spot OUT For more information, refer to setting the recording.Record Recording scheduleRecord option Rec Quality & resolutionEvent Event record durationVideo Loss detection Alarm scheduleYou can set the alarm output time if a video loss occurs Motion detectionLive transfer NetworkConnection DdnsMailing service ABout Recommended system requirements Sec BacKup viewerBMP and Jpeg You can adjust the volume level from 0 toSpeed will restore to Between activated and deactivatedPAL Product SpecificationAppendix CifsUSB HDD Sata HDDSata HDD-MAX ~ SHR-8162 Product OVERViewManagement Default SettingDuration Smtp Troubleshooting DVR We protect your rights with two steps PreambleOn the Program is not required to print an announcement No Warranty END of Terms and Conditions How to Apply These Terms to Your New ProgramsTerms and Conditions Appendix English Additional Terms No Surrender of Others Freedom PatentsEND of Terms and Conditions Revised Versions of this LicenseLimitation of Liability Do these things Is included without limitation in the term modification English Promoting the sharing and reuse of software generally Copyright C year name of author How to Apply These Terms to Your New LibrariesLoss of USE, DATA, or Profits or Business Interruption OpenSSL LicenseThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product