Samsung SHR-8080, SHR-7082, SHR-7080, SHR-7160, SHR-8162, SHR-8160, SHR-7162, SHR-8082 user manual Dvr

appendix

Symptom	Countermeasures
A message of “Need to reset date/time.” Is displayed	 This message is displayed if there occurs a problem with the time
on the screen.	setting of the internal clock or an error in the clock itself. Contact the
	retailer or the service center for more information.
The time bar is not displayed in Search mode.	 The timeline can switch between normal and extension mode.
	In extension mode, the time bar may not be displayed in the current
	timeline. Switch to normal mode or use the left or right button to
	navigate through the time bar.
The “NO HDD” icon and an error message are	 Check the HDD for connection. If the problem persists in a normal
displayed.	condition, contact the nearest service center to have the HDD checked
	by the service personnel.
I have installed an additional HDD on the DVR but it	 See the compatibilty list to check if the additional HDD is supported by
does not recognize the HDD.	the DVR. For the compatibility list, contact the retailer where you
	purchased the DVR.
I have connected an external storage device (external	 See the compatibility list of external storage devices to check if the
SATA HDD) to the DVR but the DVR seems not to	connected device is supported by the DVR.
recognize it.	For the compatibility list, contact the retailer where you purchased the
	DVR.
If I press the ESC key in full screen mode of the	 Press the ALT+TAB keys to select ‘ACTIVE MOVIE’ and press the ESC
WebViewer, the system does not switch to a normal
	key again. The system will switch to a normal split mode.
split mode.

102_ appendix

00769B_SHR-8162_ENG-NEW.indb 102

2008-12-04 오전 10:17:46