Samsung SHR-8080, SHR-7082, SHR-7080, SHR-7160, SHR-8162, SHR-8160, SHR-7162 Single Mode, Sixteen Mode

Page 78

web viewer

spLit-screen

You can change the split mode by clicking each number icon.

SINGLE MODE	QUAD MODE
~ Click < > button.

The screen displays the selected camera connected to the DVR in “singLe mode”.

~ Click < > button.

The screen displays the selected camera connected to the DVR in “Quad mode”.

M ` Only SINGLE and QUAD MODE are available in SEARCH menu.

`If 16 channel DVR is connected, you can select a mode from SINGLE to

SIXTEEN MODE.

connected dvr

This displays the IP address and the status of the connecting DVR.

M ` Connection failure message

No Response : Appears when the DVR does not respond.

Collision : Appears when Admin mode is already in use or simultaneous access to the same DVR from the PC.

Access Denied : Appears when the maximum number of users is exceeded.

`The number of simultaneous connections are limited to 5.

_ web viewer

00769B_SHR-8162_ENG-NEW.indb 78			2008-12-04 오전 10:16:34

Image 78

Contents Channel/16 Channel DVR Features OverviewImportant Safety Instructions Overview~ Operating temperature -20C ~ +85C ~ Normal capacity 170mAh~ Continuous standard load 0.2mA Package Contents Standards ApprovalsContents Backup viewer Web viewerAppendix Part Names and Functions Front Mode AlarmREC AudioPart Names and Functions Rear 7080/7082 RearVGA Video OUTAudio OUT HdmiChannel Remote ControlUsing the numeric buttons Press each button between 1 toChanging the Remote Control ID Press any button among 1 toInstallation ChecKing the instaLLation environmentHdd addition RacK instaLLationInstaLLation ` Fix the screws not to be loosened by vibrationsAdding a hdd If adding hdds to shr-7080, 7160, 8080` For SHR-7082/7162/8082/8162 models, see the following If adding hdds to shr-7082, 7162, 8082 Installed by default Connecting to Internet through Ethernet 10/100/1000BaseT Connecting the Video, Audio, and MonitorConnecting the Network ` The following figures are based on Model SHR-8162Connecting the USB Connecting External Sata HDDConnecting to Internet through Adsl Connecting POS Device Connecting the Alarm Input/OutputConnecting the RS-485 Device Getting started Starting the systemShutting down the system Login Fi gureLive Screen Configuration Icons on the Live ScreenSplit Mode Menu Error informationSplit mode menu Single Mode MenuSingle mode menu ZoomView the Launcher menu PTZSwitching the split mode Live ModeSwitching the screen mode Auto SequenceChannel Setting Manual SwitchingSelecting a spot out mode Switching to single modeSpot out Audio on/oFF Audio on/oFF in single modeZoom FreeZeEvent Monitoring System setup Setting the date/time/LanguageDate/time/Language Setting holiday Using the calendar. When the administrator setup is done, press oK Setting the administratorYou can set and change Administrator’s ID and password Permission managementSetting the group Setting the userChecking the system information Setting permissionsSystem management System Management BroadcastS/W Upgrade Using the dvrSystem Upgrade ~ Updating the SoftwareSettings Log informationSystem Log Camera Setting the deviceSetting the camera Event LogSetting the ptZ . When the PTZ setup is done, press oKStorage device Confi rming devicesFormatting Appears on the Live screen Hdd alarmHDD Alarm ManageWill not be saved Remote devicesPos devices Remote DeviceSetting the monitor MonitorSetting the spot out Setting the screen modeRecord Setting the recordingRecording schedule Recording ScheduleEvent record duration Quality / resolutionSetting standard recording properties Recording color tagsSetting event recording properties ResolutionRecord option Normal close Sensor is closed Setting the eventSensor detection EventMotion Detection Setting the motion detection areaMotion detection Sensor Detection. When the Alarm Schedule setup is done, press oK Alarm scheduleStop the alarm by canceling the schedule Alarm ScheduleYou can backup the desired data to a connected device BacKupSetting the Backup BackupSetting the connection NetworK conFigurationConnection mode You can set the network connection route and protocolSetting the protocol Protocol~ dynamic ip dhcp mode Connecting and setting the networkWhen no router is used DdnsWhen a router is used 192.168.0.254Network Ddns setting Live transferLive Transfer Event setting Mailing serviceSmtp setting Mailing ServiceUsingthe Group settingRecipient setting GroupAdd UserPtZ device Using the ptZ cameraControLLing a ptZ device Getting started with ptZ. Press oK Preset will be saved as a name that you entered Preset settingCamera setting AccordinglyTime search It does not appear in Backup SearchSearch You can search for recorded data of a desired timeBackup search Event searchPOS Search Pos searchMotion search Motion SearchBackup Range PLayBacKPlay What is Web Viewer? Introducing Web ViewerConnecting weB viewer ` All settings are applied by the DVR’s settings. Click install activex control… WeB viewer 0 web viewer Using Live viewer Osd inFormation dispLay You can change the split mode by clicking each number iconSingle Mode Quad Mode Nine Mode SpLit-screenChanging the Live screen mode Connected dvr` The number of simultaneous connections are limited to Saving the Live screen on the pc ~ capture Saves the current screen into a BMP or Jpeg fi leIt cannot be modified Using ptZ camera Changing the Live screen channeL` Tilt of Power PTZ operates properly within Pan/Tilt of the Smart dome camera is manipulatedEx Samsung SCC-C6475 Using search viewer Single Mode Sixteen ModeWeb Viewer\VideoClip\Search. To change the saving path Searching the recorded video in the caLendar Searching the recorded video in the timeLineSystem Viewer setupYou can confi gure the various settings of the DVR system ControLLing pLayBacKHoliday Permission managementSystem management Device CameraStorage device Remote device Pos deviceMonitor Recording schedule For more information, refer to setting the recording.Record ~ Spot OUTEvent record duration Rec Quality & resolutionEvent Record optionMotion detection Alarm scheduleYou can set the alarm output time if a video loss occurs Video Loss detectionDdns NetworkConnection Live transferMailing service ABout Sec BacKup viewer Recommended system requirementsBetween activated and deactivated You can adjust the volume level from 0 toSpeed will restore to BMP and JpegProduct Specification PALSata HDD CifsUSB HDD AppendixSata HDD-MAX Product OVERView ~ SHR-8162Default Setting ManagementDuration Smtp Troubleshooting DVR Preamble We protect your rights with two stepsOn the Program is not required to print an announcement No Warranty How to Apply These Terms to Your New Programs END of Terms and ConditionsTerms and Conditions Appendix English Additional Terms Patents No Surrender of Others FreedomRevised Versions of this License Limitation of LiabilityEND of Terms and Conditions Do these things Is included without limitation in the term modification English Promoting the sharing and reuse of software generally How to Apply These Terms to Your New Libraries Copyright C year name of authorOpenSSL License Loss of USE, DATA, or Profits or Business InterruptionThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product