Samsung SHR-7162 Remote devices, Pos devices, Will not be saved, Remote Device, POS Device

remote devices

You can set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR.

Using the mouse may help easy setup.

.Use the up/down buttons (▲▼) in <device> window to move to <remote device>, and press [enter] button.

.Use direction buttons (▲▼_ +) to move to the desired item, and press [enter] button.

.Set the values of each communication setup of the remote device.

~Baud rate : Baud rate settings of the DVR, PTZ camera and system keyboard should be matched for proper operations.

.Make sure to match IDs of the DVR, System Keyboard and Remote Control, and press <oK>.

Remote Device
Baudrate		Parity		Data		Stop Bit		Transfer type
9600		None		8		1		Half Duplex	
System Keyboard		OFF		ID	00				●
Remote Control		ON		ID	32
									using
			OK		Cancel				the dvr

M ` For changing the remote control’s ID, refer to “Changing the Remote Control ID”. (Page 13)

pos devices

You can set properties of POS devices connected to the DVR.

A POS device connection requires channel, preset, and port/Ethernet settings.

Using the mouse may help easy setup.

.Use the up/down buttons (▲▼) in <device> window to move to <pos device>, and press [enter] button.

.Use direction buttons (▲▼_ +) to move to a desired item, and set the value.

~POS USE : When selected <pos use>, DVR and POS will be connected.

J	` If you change settings for the device and press <OK> while
	the <POS USE> is not checked, the changes for POS device
	will not be saved.

POS Device

POS USE

POS Device Setup

POS	CH	Preset 		Port/Ethernet
1	None	No preset		None
2	None	No preset		None
3	None	No preset		None
4	None	No preset		None
5	None	No preset		None
6	None	No preset		None
7	None	No preset		None
8	None	No preset		None
				Previous/Next Page
		OK	Cancel

~POS Device Setup : Sets the communication setups for the POS device and DVR.

` It is independent to the Remote Device setup.

POS Device
POS USE									POS Device Setup
POS		CH			Preset 			Port/Ethernet
1		None			No preset				None
2		None			No preset				None
POS Device Setup
3	Baudrate	None	Parity		No preset		Stop bit		None
					Data				Transfer type
	9600		None		8		1		Half Duplex	
6		None			No preset	Cancel			None
					OK
7		None			No preset				None
8		None			No preset				None
								Previous/Next Page
					OK	Cancel

English _

00769B_SHR-8162_ENG-NEW.indb 45

2008-12-04 오전 10:15:28