Samsung SHR-7162 Video Loss detection, Alarm schedule, Stop the alarm by canceling the schedule

Page 53

video Loss detection

You can set the alarm to be generated on a camera disconnection, which causes a video loss.

Using the mouse may help easy setup.

. Use the up/down buttons (▲▼) in <event> window to

Video Loss Detection

move to <video Loss detection>, and press [enter]

button.

CH

Video Loss State 

Alarm 

Alarm Duration 

A window of video loss detection area setup appears.

1

OFF



1,2,3,4

OFF



2

OFF



1,2,3,4

OFF



3

OFF



1,2,3,4

OFF



. Use direction buttons (▲▼_ +) to move to a desired

4

OFF



1,2,3,4

OFF



5

OFF



1,2,3,4

OFF



item, and set the value.

6

OFF



1,2,3,4

OFF



7

OFF



1,2,3,4

OFF



~ Video Loss State : Sets whether to activate video loss

8

OFF



1,2,3,4

OFF



Previous/Next Page

detection.

~ Alarm : Sets the alarm output method.

OK

Cancel

`For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 44)

~Alarm Duration : Sets the duration of alarm signal and alarm sound. . When the video loss detection setup is done, press <oK>.

alarm schedule

You can set the conditions and operating hours for scheduled alarms.

Using the mouse may help easy setup.

● using the dvr

.Use the up/down buttons (▲▼) in <event> window to move to <alarm schedule>, and press [enter] button.

.A window of <alarm schedule> settings appears.

.Alarm : Sets the alarm output method.

`For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 44)

~<on> : Marked in orange, and always generates alarm on scheduled time.

~<oFF> : Marked in white, no alarm is generated even if an event occurs.

Alarm Schedule
Alarm1
All	0	1	2	3	4	5	6	7	8	9	10	11 12 13 14 15 16 17 18 19 20 21 22 23
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Hol
OFF			ON				Event Sync					Apply to All Alarm
									OK			Cancel

~Event Sync : Marked in Blue, generates alarm only when an event occurs.

~Apply to All Alarm : Applies the confi gured schedule to all alarms.

M	` When the alarm is generated on the scheduled time, you can
	stop the alarm by canceling the schedule.

.When the Alarm Schedule setup is done, press <oK>.

Alarm Schedule


	Alarm1

	All	0	1	2		3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23
	Sun
	Mon		Apply to All Alarm
	Tue
	Wed								Apply the alarm scheduling to all?
	Thu								Apply the alarm scheduling to all?
	Thu
	Fri										OK				Cancel
	Sat										OK				Cancel
	Hol

	OFF			ON					Event Sync											Apply to All Alarm

OK Cancel

English _

00769B_SHR-8162_ENG-NEW.indb 53

2008-12-04 오전 10:15:46

Image 53

Contents Channel/16 Channel DVR Overview FeaturesOverview Important Safety Instructions~ Continuous standard load 0.2mA ~ Operating temperature -20C ~ +85C~ Normal capacity 170mAh Standards Approvals Package ContentsContents Appendix Backup viewerWeb viewer Part Names and Functions Front REC AlarmMode Audio7080/7082 Rear Part Names and Functions RearAudio OUT Video OUTVGA HdmiUsing the numeric buttons Remote ControlChannel Press each button between 1 toPress any button among 1 to Changing the Remote Control IDChecKing the instaLLation environment InstallationInstaLLation RacK instaLLationHdd addition ` Fix the screws not to be loosened by vibrations` For SHR-7082/7162/8082/8162 models, see the following Adding a hddIf adding hdds to shr-7080, 7160, 8080 If adding hdds to shr-7082, 7162, 8082 Installed by default Connecting the Network Connecting the Video, Audio, and MonitorConnecting to Internet through Ethernet 10/100/1000BaseT ` The following figures are based on Model SHR-8162Connecting to Internet through Adsl Connecting the USBConnecting External Sata HDD Connecting the Alarm Input/Output Connecting POS DeviceConnecting the RS-485 Device Shutting down the system Getting startedStarting the system Fi gure LoginIcons on the Live Screen Live Screen ConfigurationSplit mode menu Error informationSplit Mode Menu Single Mode MenuZoom Single mode menuPTZ View the Launcher menuSwitching the screen mode Live ModeSwitching the split mode Auto SequenceManual Switching Channel SettingSpot out Selecting a spot out modeSwitching to single mode Zoom Audio on/oFF in single modeAudio on/oFF FreeZeEvent Monitoring Date/time/Language System setupSetting the date/time/Language Using the calendar Setting holidayYou can set and change Administrator’s ID and password Setting the administrator. When the administrator setup is done, press oK Permission managementSetting the user Setting the groupSystem management Setting permissionsChecking the system information System ManagementSystem Upgrade Using the dvr BroadcastS/W Upgrade ~ Updating the SoftwareSystem Log SettingsLog information Setting the camera Setting the deviceCamera Event Log. When the PTZ setup is done, press oK Setting the ptZFormatting Storage deviceConfi rming devices HDD Alarm Hdd alarmAppears on the Live screen ManagePos devices Remote devicesWill not be saved Remote DeviceMonitor Setting the monitorSetting the screen mode Setting the spot outRecording schedule Setting the recordingRecord Recording ScheduleSetting standard recording properties Quality / resolutionEvent record duration Recording color tagsRecord option Setting event recording propertiesResolution Sensor detection Setting the eventNormal close Sensor is closed EventMotion detection Setting the motion detection areaMotion Detection Sensor DetectionStop the alarm by canceling the schedule Alarm schedule. When the Alarm Schedule setup is done, press oK Alarm ScheduleSetting the Backup BacKupYou can backup the desired data to a connected device BackupConnection mode NetworK conFigurationSetting the connection You can set the network connection route and protocolProtocol Setting the protocolWhen no router is used Connecting and setting the network~ dynamic ip dhcp mode DdnsNetwork When a router is used192.168.0.254 Live Transfer Ddns settingLive transfer Smtp setting Mailing serviceEvent setting Mailing ServiceRecipient setting Group settingUsingthe GroupAdd UserControLLing a ptZ device Using the ptZ cameraPtZ device Getting started with ptZCamera setting Preset setting. Press oK Preset will be saved as a name that you entered AccordinglySearch It does not appear in Backup SearchTime search You can search for recorded data of a desired timeEvent search Backup searchMotion search Pos searchPOS Search Motion SearchPlay Backup RangePLayBacK Introducing Web Viewer What is Web Viewer?. Click install activex control… WeB viewer Connecting weB viewer` All settings are applied by the DVR’s settings 0 web viewer Using Live viewer Single Mode Quad Mode Nine Mode You can change the split mode by clicking each number iconOsd inFormation dispLay SpLit-screen` The number of simultaneous connections are limited to Changing the Live screen modeConnected dvr It cannot be modified Saving the Live screen on the pc~ capture Saves the current screen into a BMP or Jpeg fi le Changing the Live screen channeL Using ptZ cameraEx Samsung SCC-C6475 ` Tilt of Power PTZ operates properly withinPan/Tilt of the Smart dome camera is manipulated Using search viewer Sixteen Mode Single ModeWeb Viewer\VideoClip\Search. To change the saving path Searching the recorded video in the timeLine Searching the recorded video in the caLendarYou can confi gure the various settings of the DVR system Viewer setupSystem ControLLing pLayBacKPermission management HolidaySystem management Storage device DeviceCamera Monitor Remote devicePos device Record For more information, refer to setting the recording.Recording schedule ~ Spot OUTEvent Rec Quality & resolutionEvent record duration Record optionYou can set the alarm output time if a video loss occurs Alarm scheduleMotion detection Video Loss detectionConnection NetworkDdns Live transferMailing service ABout Recommended system requirements Sec BacKup viewerSpeed will restore to You can adjust the volume level from 0 toBetween activated and deactivated BMP and JpegPAL Product SpecificationUSB HDD CifsSata HDD AppendixSata HDD-MAX ~ SHR-8162 Product OVERViewManagement Default SettingDuration Smtp Troubleshooting DVR We protect your rights with two steps PreambleOn the Program is not required to print an announcement No Warranty END of Terms and Conditions How to Apply These Terms to Your New ProgramsTerms and Conditions Appendix English Additional Terms No Surrender of Others Freedom PatentsEND of Terms and Conditions Revised Versions of this LicenseLimitation of Liability Do these things Is included without limitation in the term modification English Promoting the sharing and reuse of software generally Copyright C year name of author How to Apply These Terms to Your New LibrariesLoss of USE, DATA, or Profits or Business Interruption OpenSSL LicenseThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product