Samsung SHR-8082, SHR-7082, SHR-7080 Spot out, Selecting a spot out mode, Switching to single mode

Page 31

switching to single mode

In a split mode, select and double-click a desired channel to switch to its Single mode.

Press the number corresponding to a desired channel on the front panel or the remote control to switch to its Single mode.

Refer to “remote control>using the numeric buttons”. (Page 12)

`Ex : If double-clicking CH 3 or pressing the number “3” on the remote control or the front panel.

	CH1	CH2	CH3	CH4
	CH5	CH6	CH7	CH8	;
	CH9	CH10	CH11	CH12	;
	CH9	CH10	CH11	CH12
	CH13	CH14	CH15	CH16	CH3

spot out

The SPOT OUT monitoring is independent of the Live mode, which monitors a specifi c channel through the SPOT OUT port.

selecting a spot out mode

If an event occurs such as sensor, motion or alarm from the SPOT OUT port in connection with a monitor, you can select a output screen mode.

! Live

1.In Live mode, right-click any area on the screen. The Live menu appears.

. Click SPOT OUT.

The split screen appears according to the SPOT OUT source. (Page 47)

` SPOT OUT 1 : Supports 16-, 9-, 4-split, Auto Sequence and

Single modes.

` SPOT OUT 2, 3, 4 : Supports 4-split, Auto Sequence and Single

modes.

` For the SPOT OUT port of a model, refer to “Part Names and

Functions (Rear)”. (Page 10)

Scene Mode	
SPOT OUT	
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu

Shutdown Launcher hide Logout

				CH1
SPOT OUT 1		16-split		CH2
SPOT OUT 1		16-split		CH3
SPOT OUT 2		9-split		CH3
SPOT OUT 2		9-split		CH4
SPOT OUT 3		4-split		CH4
SPOT OUT 3		4-split		CH5
				CH5
SPOT OUT 4		Auto Sequence		CH6
		Single		CH7
				CH8
				CH9
				CH10
				CH11
				CH12
				CH13
				CH14
				CH15
				CH16

< Multichannel Live Menu >

English _1

00769B_SHR-8162_ENG-NEW.indb 31

2008-12-04 오전 10:14:55

Image 31

Contents Channel/16 Channel DVR Overview FeaturesOverview Important Safety Instructions~ Normal capacity 170mAh ~ Operating temperature -20C ~ +85C~ Continuous standard load 0.2mA Standards Approvals Package ContentsContents Web viewer Backup viewerAppendix Part Names and Functions Front Audio AlarmREC Mode7080/7082 Rear Part Names and Functions RearHdmi Video OUTAudio OUT VGAPress each button between 1 to Remote ControlUsing the numeric buttons ChannelPress any button among 1 to Changing the Remote Control IDChecKing the instaLLation environment Installation` Fix the screws not to be loosened by vibrations RacK instaLLationInstaLLation Hdd additionIf adding hdds to shr-7080, 7160, 8080 Adding a hdd` For SHR-7082/7162/8082/8162 models, see the following If adding hdds to shr-7082, 7162, 8082 Installed by default ` The following figures are based on Model SHR-8162 Connecting the Video, Audio, and MonitorConnecting the Network Connecting to Internet through Ethernet 10/100/1000BaseTConnecting External Sata HDD Connecting the USBConnecting to Internet through Adsl Connecting the Alarm Input/Output Connecting POS DeviceConnecting the RS-485 Device Starting the system Getting startedShutting down the system Fi gure LoginIcons on the Live Screen Live Screen ConfigurationSingle Mode Menu Error informationSplit mode menu Split Mode MenuZoom Single mode menuPTZ View the Launcher menuAuto Sequence Live ModeSwitching the screen mode Switching the split modeManual Switching Channel SettingSwitching to single mode Selecting a spot out modeSpot out FreeZe Audio on/oFF in single modeZoom Audio on/oFFEvent Monitoring Setting the date/time/Language System setupDate/time/Language Using the calendar Setting holidayPermission management Setting the administratorYou can set and change Administrator’s ID and password . When the administrator setup is done, press oKSetting the user Setting the groupSystem Management Setting permissionsSystem management Checking the system information~ Updating the Software Using the dvrSystem Upgrade  BroadcastS/W UpgradeLog information SettingsSystem Log Event Log Setting the deviceSetting the camera Camera. When the PTZ setup is done, press oK Setting the ptZConfi rming devices Storage deviceFormatting Manage Hdd alarmHDD Alarm Appears on the Live screenRemote Device Remote devicesPos devices Will not be savedMonitor Setting the monitorSetting the screen mode Setting the spot outRecording Schedule Setting the recordingRecording schedule RecordRecording color tags Quality / resolutionSetting standard recording properties Event record durationResolution Setting event recording propertiesRecord option Event Setting the eventSensor detection Normal close Sensor is closedSensor Detection Setting the motion detection areaMotion detection Motion DetectionAlarm Schedule Alarm scheduleStop the alarm by canceling the schedule . When the Alarm Schedule setup is done, press oKBackup BacKupSetting the Backup You can backup the desired data to a connected deviceYou can set the network connection route and protocol NetworK conFigurationConnection mode Setting the connectionProtocol Setting the protocolDdns Connecting and setting the networkWhen no router is used ~ dynamic ip dhcp mode192.168.0.254 When a router is usedNetwork Live transfer Ddns settingLive Transfer Mailing Service Mailing serviceSmtp setting Event settingGroupAdd User Group settingRecipient setting UsingtheGetting started with ptZ Using the ptZ cameraControLLing a ptZ device PtZ deviceAccordingly Preset settingCamera setting . Press oK Preset will be saved as a name that you enteredYou can search for recorded data of a desired time It does not appear in Backup SearchSearch Time searchEvent search Backup searchMotion Search Pos searchMotion search POS SearchPLayBacK Backup RangePlay Introducing Web Viewer What is Web Viewer?` All settings are applied by the DVR’s settings Connecting weB viewer. Click install activex control… WeB viewer 0 web viewer Using Live viewer SpLit-screen You can change the split mode by clicking each number iconSingle Mode Quad Mode Nine Mode Osd inFormation dispLayConnected dvr Changing the Live screen mode` The number of simultaneous connections are limited to ~ capture Saves the current screen into a BMP or Jpeg fi le Saving the Live screen on the pcIt cannot be modified Changing the Live screen channeL Using ptZ cameraPan/Tilt of the Smart dome camera is manipulated ` Tilt of Power PTZ operates properly withinEx Samsung SCC-C6475 Using search viewer Sixteen Mode Single ModeWeb Viewer\VideoClip\Search. To change the saving path Searching the recorded video in the timeLine Searching the recorded video in the caLendarControLLing pLayBacK Viewer setupYou can confi gure the various settings of the DVR system SystemPermission management HolidaySystem management Camera DeviceStorage device Pos device Remote deviceMonitor ~ Spot OUT For more information, refer to setting the recording.Record Recording scheduleRecord option Rec Quality & resolutionEvent Event record durationVideo Loss detection Alarm scheduleYou can set the alarm output time if a video loss occurs Motion detectionLive transfer NetworkConnection DdnsMailing service ABout Recommended system requirements Sec BacKup viewerBMP and Jpeg You can adjust the volume level from 0 toSpeed will restore to Between activated and deactivatedPAL Product SpecificationAppendix CifsUSB HDD Sata HDDSata HDD-MAX ~ SHR-8162 Product OVERViewManagement Default SettingDuration Smtp Troubleshooting DVR We protect your rights with two steps PreambleOn the Program is not required to print an announcement No Warranty END of Terms and Conditions How to Apply These Terms to Your New ProgramsTerms and Conditions Appendix English Additional Terms No Surrender of Others Freedom PatentsLimitation of Liability Revised Versions of this LicenseEND of Terms and Conditions Do these things Is included without limitation in the term modification English Promoting the sharing and reuse of software generally Copyright C year name of author How to Apply These Terms to Your New LibrariesLoss of USE, DATA, or Profits or Business Interruption OpenSSL LicenseThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product