Samsung SHR-8082, SHR-7082, SHR-7080 Preset setting, Camera setting, Accordingly, Zone SET

Page 63

preset setting

A preset is a set of specifi c target points of a PTZ camera, and up to 20 presets per a camera can be stored.

Using the mouse may help easy setup.

1.In PTZ Control mode, use the direction buttons to adjust the camera in a desired direction.

. Select the <save/add> key.

The virtual keyboard for inputting the preset will appear.

` Refer to “Using Virtual Keyboard”. (Page 36)

~Save/Add : You can add and save the preset.

~Rename : You can change the settings of the existing presets.

~Delete : Deletes the selected preset.

~Delete All : Deletes all existing presets.

M	` If you replace the camera of the channel that stores the preset list with a new one, you should reset the preset
	accordingly.

. Press <oK>.

The preset will be saved as a name that you entered.

camera setting

A PTZ camera has its own menu system. Optimize the PTZ camera according to the DVR.

Using the mouse may help easy setup.

● using the dvr

1.Connect the PTZ camera to the DVR and run the PTZ camera again to display the camera’s protocol setting window.

. Check the protocol ID of the camera.

`In “Device > Setting the PTZ”, enter the PTZ camera ID in the ID input box of the channel that is connected to the PTZ camera. (Page 42)

SAMSUNG PROTOCOL

ADDR	0
TYPE	RS-485,HALF
BAUD	9600
LENS	OK!
TILT	OK!
PAN	OK!

. Select <cam. setup> in the PTZ Control menu. The camera-specifi c menu appears.

`You can configure the settings of only those cameras that support the protocols of Samsung and Panasonic.

`If you are setting Auto Pan or Pattern in the camera menu, press and hold the appropriate button for a certain time so that the button operation can be different from that in normal PTZ setting.

Camera Setup

OK Exit

** MAIN MENU **

CAMERA SET...

VIDEO SET...

PRESET...

ZONE SET...

AUTO SET...

ALARM SET...

OTHER SET...

CLOCK SET...

SYSTEM INFO...

English _

00769B_SHR-8162_ENG-NEW.indb 63

2008-12-04 오전 10:16:02

Image 63

Contents Channel/16 Channel DVR Overview FeaturesOverview Important Safety Instructions~ Operating temperature -20C ~ +85C ~ Normal capacity 170mAh~ Continuous standard load 0.2mA Standards Approvals Package ContentsContents Backup viewer Web viewerAppendix Part Names and Functions Front Audio AlarmREC Mode7080/7082 Rear Part Names and Functions RearHdmi Video OUTAudio OUT VGAPress each button between 1 to Remote ControlUsing the numeric buttons ChannelPress any button among 1 to Changing the Remote Control IDChecKing the instaLLation environment Installation` Fix the screws not to be loosened by vibrations RacK instaLLationInstaLLation Hdd additionAdding a hdd If adding hdds to shr-7080, 7160, 8080` For SHR-7082/7162/8082/8162 models, see the following If adding hdds to shr-7082, 7162, 8082 Installed by default ` The following figures are based on Model SHR-8162 Connecting the Video, Audio, and MonitorConnecting the Network Connecting to Internet through Ethernet 10/100/1000BaseTConnecting the USB Connecting External Sata HDDConnecting to Internet through Adsl Connecting the Alarm Input/Output Connecting POS DeviceConnecting the RS-485 Device Getting started Starting the systemShutting down the system Fi gure LoginIcons on the Live Screen Live Screen ConfigurationSingle Mode Menu Error informationSplit mode menu Split Mode MenuZoom Single mode menuPTZ View the Launcher menuAuto Sequence Live ModeSwitching the screen mode Switching the split modeManual Switching Channel SettingSelecting a spot out mode Switching to single modeSpot out FreeZe Audio on/oFF in single modeZoom Audio on/oFFEvent Monitoring System setup Setting the date/time/LanguageDate/time/Language Using the calendar Setting holidayPermission management Setting the administratorYou can set and change Administrator’s ID and password . When the administrator setup is done, press oKSetting the user Setting the groupSystem Management Setting permissionsSystem management Checking the system information~ Updating the Software Using the dvrSystem Upgrade  BroadcastS/W UpgradeSettings Log informationSystem Log Event Log Setting the deviceSetting the camera Camera. When the PTZ setup is done, press oK Setting the ptZStorage device Confi rming devicesFormatting Manage Hdd alarmHDD Alarm Appears on the Live screenRemote Device Remote devicesPos devices Will not be savedMonitor Setting the monitorSetting the screen mode Setting the spot outRecording Schedule Setting the recordingRecording schedule RecordRecording color tags Quality / resolutionSetting standard recording properties Event record durationSetting event recording properties ResolutionRecord option Event Setting the eventSensor detection Normal close Sensor is closedSensor Detection Setting the motion detection areaMotion detection Motion DetectionAlarm Schedule Alarm scheduleStop the alarm by canceling the schedule . When the Alarm Schedule setup is done, press oKBackup BacKupSetting the Backup You can backup the desired data to a connected deviceYou can set the network connection route and protocol NetworK conFigurationConnection mode Setting the connectionProtocol Setting the protocolDdns Connecting and setting the networkWhen no router is used ~ dynamic ip dhcp modeWhen a router is used 192.168.0.254Network Ddns setting Live transferLive Transfer Mailing Service Mailing serviceSmtp setting Event settingGroupAdd User Group settingRecipient setting UsingtheGetting started with ptZ Using the ptZ cameraControLLing a ptZ device PtZ deviceAccordingly Preset settingCamera setting . Press oK Preset will be saved as a name that you enteredYou can search for recorded data of a desired time It does not appear in Backup SearchSearch Time searchEvent search Backup searchMotion Search Pos searchMotion search POS SearchBackup Range PLayBacKPlay Introducing Web Viewer What is Web Viewer?Connecting weB viewer ` All settings are applied by the DVR’s settings. Click install activex control… WeB viewer 0 web viewer Using Live viewer SpLit-screen You can change the split mode by clicking each number iconSingle Mode Quad Mode Nine Mode Osd inFormation dispLayChanging the Live screen mode Connected dvr` The number of simultaneous connections are limited to Saving the Live screen on the pc ~ capture Saves the current screen into a BMP or Jpeg fi leIt cannot be modified Changing the Live screen channeL Using ptZ camera` Tilt of Power PTZ operates properly within Pan/Tilt of the Smart dome camera is manipulatedEx Samsung SCC-C6475 Using search viewer Sixteen Mode Single ModeWeb Viewer\VideoClip\Search. To change the saving path Searching the recorded video in the timeLine Searching the recorded video in the caLendarControLLing pLayBacK Viewer setupYou can confi gure the various settings of the DVR system SystemPermission management HolidaySystem management Device CameraStorage device Remote device Pos deviceMonitor ~ Spot OUT For more information, refer to setting the recording.Record Recording scheduleRecord option Rec Quality & resolutionEvent Event record durationVideo Loss detection Alarm scheduleYou can set the alarm output time if a video loss occurs Motion detectionLive transfer NetworkConnection DdnsMailing service ABout Recommended system requirements Sec BacKup viewerBMP and Jpeg You can adjust the volume level from 0 toSpeed will restore to Between activated and deactivatedPAL Product SpecificationAppendix CifsUSB HDD Sata HDDSata HDD-MAX ~ SHR-8162 Product OVERViewManagement Default SettingDuration Smtp Troubleshooting DVR We protect your rights with two steps PreambleOn the Program is not required to print an announcement No Warranty END of Terms and Conditions How to Apply These Terms to Your New ProgramsTerms and Conditions Appendix English Additional Terms No Surrender of Others Freedom PatentsRevised Versions of this License Limitation of LiabilityEND of Terms and Conditions Do these things Is included without limitation in the term modification English Promoting the sharing and reuse of software generally Copyright C year name of author How to Apply These Terms to Your New LibrariesLoss of USE, DATA, or Profits or Business Interruption OpenSSL LicenseThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product