Samsung SHR-7080, SHR-7082, SHR-7160, SHR-8162, SHR-8160, SHR-7162 Event Monitoring, Stop alarm

Event Monitoring

This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs.

In “Monitor>Event Display”, set the event monitoring to ON/OFF and specify the event display time. (Page 46)

~If multiple events occur simultaneously, the screen will switch to a split mode.

-2~4 events: 4-split mode

-5~9 events: 9-split mode

-10~16 events: 16-split mode

~If the second event occurs within the set time of <Event Display>, the first event will last until the second one is terminated. (Page 46)

` Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.

Event occurrence	5 seconds
	Stop alarm

CH1

`Ex : If you set <Event Display> to 5 seconds, and the second event occurs in CH 2 within the set time after the first event occurred in CH 1.

Event occurrence 4 seconds 9 seconds

Stop alarm

CH1 CH2

CH1

! live

M ` Press the [ALARM] button to reset the alarm settings and to release the event mode.

`If an alarm activates in the condition you have set the event record, and pre/post alarm times, the event record will be performed.

`This will also apply to the SPOT OUT monitor.

English _33

00769B_SHR-8162_ENG-NEW.indb 33

2008-12-04 오전 10:14:59