using the DVR
controLLing a ptZ device
The DVR enables you to adjust the settings of a PTZ camera as well as an ordinary one to your preference.
ptZ device
The PTZ device can be activated only if a channel in connection with the PTZ camera is selected.
getting started with ptZ
The PTZ camera is available, only if a channel is selected, in the following way:
`Using the button on the remote control or the front panel
Select the [PTZ] button on the remote control or the front panel. | Scene Mode | | |
SPOT OUT | | ||
| PTZ Control |
| |
` Using the launcher menu | ZOOM |
| |
Audio | | ||
| |||
Click PTZ < PTZ > to display the live launcher. | Freeze |
| |
Stop Alarm |
| ||
| Record |
| |
` Using the | Play |
| |
Search |
| ||
Backup |
| ||
Main Menu |
| ||
select <PTZ Control>. | Launcher hide |
| |
| Shutdown |
| |
| Logout |
|
PTZ Alarm Freeze
`Using icons on the live screen
Click the PTZ < 
> icon on the live screen.
M | ` The PTZ function is available only if the PTZ camera is |
| connected so that the PTZ icon is displayed on the screen. |
using the ptZ camera
You can use one camera to perform all functions of PAN, TITL and ZOOM for monitoring multiple places and set the preset to your preference in a desired mode.
1.Launch the <ptZ control> menu.
As the PTZ < 
> icon on the bottom right corner turns yellow, you access the “ptZ control” mode to display the “ptZ control” menu.
. Use direction keys in the launcher menu or use direction |
|
|
|
| |
buttons (▲▼_ +) on the remote control or the front panel |
|
|
|
| |
to move the target area to record. |
|
|
| ||
PTZ Control CAM01 |
|
| |||
~ Zoom : You can use the Zoom function of the PTZ camera. |
| Auto Pan | Preset |
| |
| Scan |
|
| ||
OK | Select Preset |
| |||
~ Auto Pan : The camera automatically runs between the two | Pattern | Save/Add | Rename | ||
| |||||
| Cam. Setup | Delete | Delete All | ||
points that you selected. |
| ||||
|
|
|
| ||
~Scan : The camera moves to the preset points in the specifi ed sequence.
If multiple presets are specifi ed, the PTZ camera will automatically move to all of the preset points one at a time.
~Pattern : Makes the PTZ camera remember and follow the past route.
`The functions of Auto Pan, Scan and Pattern are supported in the protocols of Samsung, Panasonic and Pelco, and are different in terms of the name and setting, depending on the protocols of Samsung, Panasonic and Pelco.
(Panasonic : Auto Pan, Sequence, Sort / Pelco : Auto Pan, Frame Scan, Pattern)
M | ` Before entering the PTZ device control mode, set the values of the PTZ device in the <Setting the PTZ> menu. |
| (Page 42) |