Samsung SHR-7082, SHR-7080, SHR-7160 Osd inFormation dispLay, SpLit-screen, Camera control

Page 72

web viewer

osd inFormation dispLay

The channel number, video size, and IP address of the connected

DVR are displayed.

The current date and time of the DVR are displayed.

Alarm icon appears when alarm is issued.

It disappears when pressed the [aLarm] button of the DVR.

Motion icon appears when motion is detected.

It disappears when pressed the [aLarm] button of the DVR.

It displays whether the PTZ controls are active.

M	` If you have set PTZ cameras for the DVR, “PTZ” is displayed on the
	screen. Select a PTZ camera channel and use the [PTZ] button for
	camera control.

spLit-screen

You can change the split mode by clicking each number icon.

SINGLE MODE

QUAD MODE

NINE MODE

SIXTEEN MODE

~ Click <> button.

The screen displays the selected camera connected to the DVR in

“singLe mode”.

~Click <> button.

The screen displays the selected camera connected to the DVR in “Quad mode”.

~Click <> button.

The screen displays the selected camera connected to the DVR in “nine mode”.

~Click <> button.

The screen displays the selected camera connected to the DVR in “sixteen mode”.

~Click <> button.

The screen displays the selected camera connected to the DVR in “FuLL screen mode”.

Double clicking on the screen or pressing any button of the keyboard returns to the previous mode.

_ web viewer

00769B_SHR-8162_ENG-NEW.indb 72

2008-12-04 오전 10:16:24

Image 72

Contents Channel/16 Channel DVR Features OverviewImportant Safety Instructions Overview~ Operating temperature -20C ~ +85C ~ Normal capacity 170mAh~ Continuous standard load 0.2mA Package Contents Standards ApprovalsContents Backup viewer Web viewerAppendix Part Names and Functions Front Alarm RECMode AudioPart Names and Functions Rear 7080/7082 RearVideo OUT Audio OUTVGA HdmiRemote Control Using the numeric buttonsChannel Press each button between 1 toChanging the Remote Control ID Press any button among 1 toInstallation ChecKing the instaLLation environmentRacK instaLLation InstaLLationHdd addition ` Fix the screws not to be loosened by vibrationsAdding a hdd If adding hdds to shr-7080, 7160, 8080` For SHR-7082/7162/8082/8162 models, see the following If adding hdds to shr-7082, 7162, 8082 Installed by default Connecting the Video, Audio, and Monitor Connecting the NetworkConnecting to Internet through Ethernet 10/100/1000BaseT ` The following figures are based on Model SHR-8162Connecting the USB Connecting External Sata HDDConnecting to Internet through Adsl Connecting POS Device Connecting the Alarm Input/OutputConnecting the RS-485 Device Getting started Starting the systemShutting down the system Login Fi gureLive Screen Configuration Icons on the Live ScreenError information Split mode menuSplit Mode Menu Single Mode MenuSingle mode menu ZoomView the Launcher menu PTZLive Mode Switching the screen modeSwitching the split mode Auto SequenceChannel Setting Manual SwitchingSelecting a spot out mode Switching to single modeSpot out Audio on/oFF in single mode ZoomAudio on/oFF FreeZeEvent Monitoring System setup Setting the date/time/LanguageDate/time/Language Setting holiday Using the calendarSetting the administrator You can set and change Administrator’s ID and password. When the administrator setup is done, press oK Permission managementSetting the group Setting the userSetting permissions System managementChecking the system information System ManagementUsing the dvr System Upgrade BroadcastS/W Upgrade ~ Updating the SoftwareSettings Log informationSystem Log Setting the device Setting the cameraCamera Event LogSetting the ptZ . When the PTZ setup is done, press oKStorage device Confi rming devicesFormatting Hdd alarm HDD AlarmAppears on the Live screen ManageRemote devices Pos devicesWill not be saved Remote DeviceSetting the monitor MonitorSetting the spot out Setting the screen modeSetting the recording Recording scheduleRecord Recording ScheduleQuality / resolution Setting standard recording propertiesEvent record duration Recording color tagsSetting event recording properties ResolutionRecord option Setting the event Sensor detectionNormal close Sensor is closed EventSetting the motion detection area Motion detectionMotion Detection Sensor DetectionAlarm schedule Stop the alarm by canceling the schedule. When the Alarm Schedule setup is done, press oK Alarm ScheduleBacKup Setting the BackupYou can backup the desired data to a connected device BackupNetworK conFiguration Connection modeSetting the connection You can set the network connection route and protocolSetting the protocol ProtocolConnecting and setting the network When no router is used~ dynamic ip dhcp mode DdnsWhen a router is used 192.168.0.254Network Ddns setting Live transferLive Transfer Mailing service Smtp settingEvent setting Mailing ServiceGroup setting Recipient settingUsingthe GroupAdd UserUsing the ptZ camera ControLLing a ptZ devicePtZ device Getting started with ptZPreset setting Camera setting. Press oK Preset will be saved as a name that you entered AccordinglyIt does not appear in Backup Search SearchTime search You can search for recorded data of a desired timeBackup search Event searchPos search Motion searchPOS Search Motion SearchBackup Range PLayBacKPlay What is Web Viewer? Introducing Web ViewerConnecting weB viewer ` All settings are applied by the DVR’s settings. Click install activex control… WeB viewer 0 web viewer Using Live viewer You can change the split mode by clicking each number icon Single Mode Quad Mode Nine ModeOsd inFormation dispLay SpLit-screenChanging the Live screen mode Connected dvr` The number of simultaneous connections are limited to Saving the Live screen on the pc ~ capture Saves the current screen into a BMP or Jpeg fi leIt cannot be modified Using ptZ camera Changing the Live screen channeL` Tilt of Power PTZ operates properly within Pan/Tilt of the Smart dome camera is manipulatedEx Samsung SCC-C6475 Using search viewer Single Mode Sixteen ModeWeb Viewer\VideoClip\Search. To change the saving path Searching the recorded video in the caLendar Searching the recorded video in the timeLineViewer setup You can confi gure the various settings of the DVR systemSystem ControLLing pLayBacKHoliday Permission managementSystem management Device CameraStorage device Remote device Pos deviceMonitor For more information, refer to setting the recording. RecordRecording schedule ~ Spot OUTRec Quality & resolution EventEvent record duration Record optionAlarm schedule You can set the alarm output time if a video loss occursMotion detection Video Loss detectionNetwork ConnectionDdns Live transferMailing service ABout Sec BacKup viewer Recommended system requirementsYou can adjust the volume level from 0 to Speed will restore toBetween activated and deactivated BMP and JpegProduct Specification PALCifs USB HDDSata HDD AppendixSata HDD-MAX Product OVERView ~ SHR-8162Default Setting ManagementDuration Smtp Troubleshooting DVR Preamble We protect your rights with two stepsOn the Program is not required to print an announcement No Warranty How to Apply These Terms to Your New Programs END of Terms and ConditionsTerms and Conditions Appendix English Additional Terms Patents No Surrender of Others FreedomRevised Versions of this License Limitation of LiabilityEND of Terms and Conditions Do these things Is included without limitation in the term modification English Promoting the sharing and reuse of software generally How to Apply These Terms to Your New Libraries Copyright C year name of authorOpenSSL License Loss of USE, DATA, or Profits or Business InterruptionThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product