Samsung SHR-8162, SHR-7082, SHR-7080, SHR-7160, SHR-8160, SHR-7162 PLayBacK, Play, Backup Range

pLayBacK

play

You can play data stored in the HDD and backup a desired portion of the data.

Using the mouse may help easy setup.

1.In Live mode, click <play> in the right-click menu or

< > in the launcher menu, or press the Play button on the remote control or the front panel.

. Use the up/down button (▲▼) to select a menu.

`For data search, refer to <Search>. (Page 64)

Scene Mode	
SPOT OUT	
Audio Off				●
Freeze
Stop Alarm				search
Record
Play
Search
Backup
Main Menu
Shutdown
				&
Launcher hide
Logout				pLay
PTZ		Alarm	Freeze

. Select a data item and click <play> in the Search menu. The selected data is played and the play launcher appears on the screen.

`If there is an existing data, <Play> will start immediately without performing the search.

~ : You can play up to 4 channels in real time.

-In a split mode, the real time playback may not be supported, depending on the record quality, resolution and number of channels. And some frame rates may be supported.

REC

~Playback Information : Displays the date and time of the current data in the top corner.

~Mode Switch : Select a desired play mode or press the [mode] button to switch the mode in the sequence of 1-split, 4-split, 9-split, 16-split and 13-split.

`The grey area in the center of the 13-split mode plays the Live channel. The default channel of the Live mode is CH1, which can be changed later.

~ : Switches to Live mode.

~ REC : Records all channels in Live mode.

~Play Time : Displays the time and date of the current video.

~Play Bar : Displays the time of recorded data in the selected channel for the past 24 hours; the red gridline indicates the current play time.

M ` Speed : Supports various speed options of x1, x2(-2), x4(-4), x8(-8), x16(-16), x32(-32) and x64(-64).

`Slow : Supports slow speed options of x1/2(-1/2), x1/4(-1/4) and x1/8(-1/8).

~Backup : Click < > to set the current time to the start time of backup; you can specify a backup area using the mouse (yellow triangle).

Click < > again to set the current time to the end time of the backup and the “Backup range” window appears.

-Format: Supports formats of DVR, AVI and SEC. Refer to a list of formats in “setting the Backup”. (Page 54)

-Device: Select a backup device.

-Check Capacity : Enables you to check the capacity of the selected storage device.

Backup Range
 Start		 End
2009-01-01 00:01:06		2009-01-01 08:25:45
 Device	None	 Format	DVR
 Folder	\20090101\	 Filename	0001	change
Check capacity		Backup
		Used
		Free
	Backup	Cancel

. If you want to return to the Live screen in Play mode, click < > in the launcher menu or press the [@] button on the remote control or the front panel.

English _

00769B_SHR-8162_ENG-NEW.indb 67

2008-12-04 오전 10:16:16