Dukane 8755C, 8063 user manual Image Menu, Size, Auto Adjust, At a video signal

Page 41

Multifunctional settings

IMAGE Menu (continued)

Item

Description

ENGLISH

 

 

 

Using the buttons ▲/▼ adjusts the horizontal size.

 

 

 

Large Small

 

H SIZE

• This item can be selected only at a RGB signal.

 

• When this adjustment is excessive, the picture may not be

 

 

 

 

displayed correctly. In such a case, please reset the adjustment

 

 

pressing the RESET button on the remote control during this

 

 

operation.

 

 

Selecting this item performs the automatic adjustment feature.

 

 

At a RGB signal

 

 

The vertical position, the horizontal position, the clock phase and

 

 

horizontal size will be automatically adjusted.

 

 

Make sure that the application window is set to its maximum size

 

 

prior to attempting to use this feature. A dark picture may still be

 

 

incorrectly adjusted. Use a bright picture when adjusting.

 

AUTO ADJUST

At a video signal

 

The video format best suited for the respective input signal will be

 

 

selected automatically.

 

 

This function is available only when the AUTO mode is selected to

 

 

the item VIDEO FORMAT of INPUT menu. For a component video

 

 

signal, the signal type is identified automatically independently of

 

 

this function.

 

 

• The automatic adjustment operation requires approximately 10

 

 

seconds. Also please note that it may not function correctly with

 

 

some input.

 

29

Image 41
Contents LCD Projector Model 8063/8755C Operators Guide Contents About The Symbols Safety Precautions Safety Precautions Be careful in handling the light source lamp Be careful in moving the projector Do not give the remote control any physical impact Take care not to fatigue your eyes Lamp Regulatory Notices Page Trademark acknowledgment About this manualThank you for purchasing this projector Contents Preparations Projector featuresAbout contents of package CB/PB CR/PR ProjectorControl buttons Remote controlSetting up At 169 screen ArrangementAt 43 screen Adjusting the projectors elevator About the filter cover for bottom-up use About Plug-and-Play capability Connecting your devicesExamples of connection with a computer Connecting to a monitor outputConnecting to a speaker with amplifier output CB/PB Examples of connection with a VCR/DVD playerCR/PR Connecting power supply Putting batteries Remote controlUsing the remote control Turning on the power Power on/offTurning off the power PowerSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom and focus Searching an input signal At a RGB signal Normal  43   At a video signal /no signal 43  169  SmallAdjusting the position Using the automatic adjustment feature At a RGB signal  At a video signalTemporarily blanking the screen Using the magnify featureFreezing the screen USB mouse and keyboard control Available function Remote control operationOperating the computer screen Using the menu function Multifunctional settingsEasy Menu Easy Menu Gamma Picture MenuHigh  Middle  LOW  Custom Picture MenuColor Temp SecamProgressive TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Image Menu PhaseOver Scan PositionAt a video signal Auto AdjustImage Menu SizeComponent  Scart RGB Input MenuAuto  Ntsc  PAL  Secam Video FormatInformation Input MenuVolume Setup MenuNormal  Whisper Normal  Hinvert  Vinvert  H&VINVERTMenu Position Screen MenuOSD Bright BlankStart UP Screen MenuMy Screen My Screen LockNo Input is Detected Sync is OUT of Range MessageOption Menu Reset  CancelSearch Auto OFFFactory Reset Service GhostOption Menu FAN SpeedLamp MaintenanceLamp Case of replacement by yourselfAir filter Apply a vacuum cleaner to the air filter and filter coverEnglish Related messages There is no input signalInternal portion temperature is rising Message Description Related messagesRegarding the indicator lamps It is time to clean the air filter Regarding the indicator lampsCooling fan is not operating There is a possibility that the interior portionPower switch is not set to the on position Electrical power cord is not pluggedThese has not been properly fixed Phenomenon Cases not involving a machine defect ReferencePhenomena that may easily be mistaken for machine defects RGB input Video input SpecificationRGB output Communication portSpecifications Page Vesa Example of computer signalVesa Text Initial set signals RGB in 1, B RGB in 2, C RGB OUT Connection to the portsComponent Video G Y, H CB/PB, I CR/PR CTS RTSRS-232C Communication Connecting the cableCommunications setting Changing the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCRC Be EF FB FA Color Temp Gain G Over Scan Frame Lock Menu Position H Lamp Time Page Audio Visual Products