Dukane 8755C, 8063 user manual English

Page 53
41
After making sure that the projector is cool adequately, lightly wipe with gauze or a soft cloth.
If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
1.
2.
Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint, etc.
After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens
directly with your hand.
Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
1.
2.
Maintenance
Other care
WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool sufficiently. The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector.
►Never try to care for the inside of the projector personally. Doing is so dangerous.
►Avoid wetting the projector or inserting liquids in the projector. It could result in a fire, an electric shock, and and/or malfunction to the projector.
• Don’t put a container containing water, cleaner or chemicals near the projector.
• Don’t use aerosols or sprays.
CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc.
• Do not use cleaner or chemicals other than those listed below.
• Do not polish or wipe with hard objects.
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every 2 years.
Caring for the lens
If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the lens, being cautious of the handling.

ENGLISH

Image 53
Contents LCD Projector Model 8063/8755C Operators Guide Contents About The Symbols Safety Precautions Safety Precautions Be careful in handling the light source lamp Be careful in moving the projector Do not give the remote control any physical impact Take care not to fatigue your eyes Lamp Regulatory Notices Page Trademark acknowledgment About this manualThank you for purchasing this projector Contents Preparations Projector featuresAbout contents of package CB/PB CR/PR ProjectorControl buttons Remote controlSetting up At 169 screen ArrangementAt 43 screen Adjusting the projectors elevator About the filter cover for bottom-up use About Plug-and-Play capability Connecting your devicesExamples of connection with a computer Connecting to a monitor outputConnecting to a speaker with amplifier output CB/PB Examples of connection with a VCR/DVD playerCR/PR Connecting power supply Putting batteries Remote controlUsing the remote control Turning on the power Power on/offTurning off the power PowerSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom and focus Searching an input signal At a RGB signal Normal  43   At a video signal /no signal 43  169  SmallAdjusting the position Using the automatic adjustment feature At a RGB signal  At a video signalTemporarily blanking the screen Using the magnify featureFreezing the screen USB mouse and keyboard control Available function Remote control operationOperating the computer screen Using the menu function Multifunctional settingsEasy Menu Easy Menu Gamma Picture MenuHigh  Middle  LOW  Custom Picture MenuColor Temp SecamProgressive TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Image Menu PhaseOver Scan PositionAt a video signal Auto AdjustImage Menu SizeComponent  Scart RGB Input MenuAuto  Ntsc  PAL  Secam Video FormatInformation Input MenuVolume Setup MenuNormal  Whisper Normal  Hinvert  Vinvert  H&VINVERTMenu Position Screen MenuOSD Bright BlankStart UP Screen MenuMy Screen My Screen LockNo Input is Detected Sync is OUT of Range MessageOption Menu Reset  CancelSearch Auto OFFFactory Reset Service GhostOption Menu FAN SpeedLamp MaintenanceLamp Case of replacement by yourselfAir filter Apply a vacuum cleaner to the air filter and filter coverEnglish Related messages There is no input signalInternal portion temperature is rising Message Description Related messagesRegarding the indicator lamps It is time to clean the air filter Regarding the indicator lampsCooling fan is not operating There is a possibility that the interior portionPower switch is not set to the on position Electrical power cord is not pluggedThese has not been properly fixed Phenomenon Cases not involving a machine defect ReferencePhenomena that may easily be mistaken for machine defects RGB input Video input SpecificationRGB output Communication portSpecifications Page Vesa Example of computer signalVesa Text Initial set signals RGB in 1, B RGB in 2, C RGB OUT Connection to the portsComponent Video G Y, H CB/PB, I CR/PR CTS RTSRS-232C Communication Connecting the cableCommunications setting Changing the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCRC Be EF FB FA Color Temp Gain G Over Scan Frame Lock Menu Position H Lamp Time Page Audio Visual Products