Dukane 8755C, 8063 TV  Film  Turn OFF, Progressive, LOAD1  LOAD2  LOAD3  LOAD4, MY Memory

Page 39

Multifunctional settings

PICTURE Menu (continued)

Item

Description

 

 

 

Using the buttons ▲/▼ switches the progressive mode.

 

TV FILM TURN OFF

 

• This function performs only at an interlaced signal of a VIDEO

 

input, a S-VIDEO input or a COMPONENT VIDEO input of 525i

PROGRESSIVE

(480i) or 625i (576i) signal.

• When the TV or FILM is selected, the screen image will be crisper.

 

 

The FILM mode is adaptable to the 2-3 Pull-Down system to the

 

conversion. But these may cause a certain defect (for example,

 

jagged line) of the picture at a quick moving object. In such a case,

 

please select the TURN OFF, even though the screen image may

 

lose the crisp.

 

Selecting a mode of MY MEMORY using the buttons ▲/▼ and then

 

pressing the button ► or the ENTER button performs each function.

 

LOAD1 LOAD2 LOAD3 LOAD4

 

SAVE4 SAVE3 SAVE2 SAVE1

MY MEMORY

This projector has 4 numbered memories for adjustment data.

Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data

 

on the memory whose number corresponds with the command’

 

s number, and adjusts the picture automatically depending on the

 

data.

 

Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current

 

adjustment data on the memory whose number corresponds with

 

the command’s number.

ENGLISH

27

Image 39
Contents LCD Projector Model 8063/8755C Operators Guide Contents About The Symbols Safety Precautions Safety Precautions Be careful in handling the light source lamp Be careful in moving the projector Do not give the remote control any physical impact Take care not to fatigue your eyes Lamp Regulatory Notices Page About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents Projector features About contents of packagePreparations CB/PB CR/PR ProjectorControl buttons Remote controlSetting up Arrangement At 43 screenAt 169 screen Adjusting the projectors elevator About the filter cover for bottom-up use About Plug-and-Play capability Connecting your devicesConnecting to a monitor output Connecting to a speaker with amplifier outputExamples of connection with a computer Examples of connection with a VCR/DVD player CR/PRCB/PB Connecting power supply Putting batteries Remote controlUsing the remote control Power Power on/offTurning on the power Turning off the powerTemporarily muting the sound Adjusting the volumeSelecting an input signal Operating At a video signal /no signal 43  169  Small Searching an input signalAdjusting the zoom and focus  At a RGB signal Normal  43  At a video signal Using the automatic adjustment featureAdjusting the position  At a RGB signalUsing the magnify feature Freezing the screenTemporarily blanking the screen Available function Remote control operation Operating the computer screenUSB mouse and keyboard control Using the menu function Multifunctional settingsEasy Menu Easy Menu Gamma Picture MenuSecam Picture MenuHigh  Middle  LOW  Custom Color TempSAVE4 SAVE3  SAVE2  SAVE1 TV  Film  Turn OFFProgressive LOAD1  LOAD2  LOAD3  LOAD4Position PhaseImage Menu Over ScanSize Auto AdjustAt a video signal Image MenuVideo Format Input MenuComponent  Scart RGB Auto  Ntsc  PAL  SecamInformation Input MenuNormal  Hinvert  Vinvert  H&VINVERT Setup MenuVolume Normal  WhisperBlank Screen MenuMenu Position OSD BrightMy Screen Lock Screen MenuStart UP My ScreenNo Input is Detected Sync is OUT of Range MessageAuto OFF Reset  CancelOption Menu SearchFAN Speed Service GhostFactory Reset Option MenuLamp MaintenanceLamp Case of replacement by yourselfAir filter Apply a vacuum cleaner to the air filter and filter coverEnglish There is no input signal Internal portion temperature is risingRelated messages Message Description Related messagesRegarding the indicator lamps There is a possibility that the interior portion Regarding the indicator lampsIt is time to clean the air filter Cooling fan is not operatingPhenomenon Cases not involving a machine defect Reference Electrical power cord is not pluggedPower switch is not set to the on position These has not been properly fixedPhenomena that may easily be mistaken for machine defects Communication port SpecificationRGB input Video input RGB outputSpecifications Page Example of computer signal Vesa TextVesa Initial set signals RGB in 1, B RGB in 2, C RGB OUT Connection to the portsComponent Video G Y, H CB/PB, I CR/PR CTS RTSConnecting the cable Communications settingRS-232C Communication Increasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset CommandCRC Be EF FB FA Color Temp Gain G Over Scan Frame Lock Menu Position H Lamp Time Page Audio Visual Products