4.2.3 Alarm / Motion Recording
Take the following steps to activate the programmed alarm recording. For ALM OPERATION, REC RATE, REC QUALITY, AUDIO, ALM TYPE, ALM DURATION, and
(1)Press the Setup button 
to enter the MAIN MENU.
(2)Select ALARM/ MOTION and press the Enter button 
to enter the ALARM/ MOTION SETTING.
(3)Set the desired REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION for use. If audio is required, set AUDIO to ON. If
(4)To activate the alarm recording, set ALM OPERATION to ON. To deactivate it, set ALM OPERATION to OFF.
MAIN MENU
RECORD
ALARM
TIMER/ SEQ/ TITLE
COMMUNICATION
DISK
SYSTEM
GOTO ALARM/ MOTION PAGE
ALARM / MOTION
ALM OPERATION |
| : ON |
REC RATE |
| : 10F/S |
REC QUALITY | : BEST | |
AUDIO | : OFF | |
ALM TYPE | : NO | |
ALM DURATION | : 0 SEC | |
PRE- ALARM | : OFF | |
MOTION SETTING |
| |
MAIN PAGE |
| |
ALARM REC ENABLE |
| |
(5)To active the motion alarm recording, Select MOTION SETTING and press the Enter button 
to enter the MOTION SETTING PAGE, set CH1/ CH2/ CH3/ CH4 TO ON, and set a suitable sensitivity according to the video sources. 1 is the Highest sensitivity, 5 is the lowest.
ALARM / MOTION
ALM OPERATION | : ON | |
REC RATE | : 20F/S | |
REC QUALITY | : BEST | |
AUDIO | : OFF | |
ALM TYPE | : NO | |
ALM DURATION | : 0 SEC | |
PRE- ALARM | : OFF | |
MOTION SETTING |
|
|
MAIN PAGE |
|
|
ALARM REC ENABLE |
| |
MOTION SETTING
CH1 | : ON |
CH2 | : OFF |
CH3 | : OFF |
CH4 | : OFF |
SENSITIVITY | : 3 |
MAIN PAGE
SET MOTION DETECTION
20