AVE MV DR4000 manual FTP Account FTP IP, User, Path

Page 43

REC RATE:

This option determines the recording rate to be recorded at when the FTP function occurs. There are 4 levels of recording rates to choose from: 1 F / 1 S, 1 F / 10 S, 1 F / 30 S and 1 F / 60 S.

ACCOUNT:

This option is used to configure the FTP account settings. This is required for the purpose of making a FTP connection. Please consult with a qualified MIS professional to configure it.

 

FTP ACCOUNT

 

FTP IP

:

192.168.001.128

USER

:

[ dvr

]

PASSWORD :

[ 00000000

]

PATH

:

[ /dvrvideo

]

FTP IP : Every FTP server has to own an IP address to be identified on the network. Input the IP address of the FTP server.

USER : Input the FTP user name (Login Name).

PASSWORD : Input the FTP password (Password).

PATH : Input the upload path while doing the FTP.

41

Image 43
Contents AVE Page Safety Precautions Table Of Contents IDE Hard Disk Installation Product Introduction Product FeaturesHard-disk drive compartment Front ViewHard disk compartment lock Up / Down CH2 / CH1 buttons Rec IndicatorDisk Indicator Display buttonJog Dial Mobile Rack Power LEDMobile Rack HDD LED Between 75Ω and Hi-Z Rear ViewThis Figure is Looked from the Rear View Alarm In/OutRecord in Input This pin Basic Connection Connecting with 1 to 4 CamerasAttaching AN External Device to DVR Seagate Hard-Disk Drive InstallationMaxtor 09- 05-2003 System Information and channel selectionSystem Information Size POS Quality Best Ntsc Rate 6 HRUpdating System Software PAL Audio OFF Configuring Recording SettingsNtsc Audio OFF Ntsc Audio onPAL Audio on Recording Operations Timer RecordingManual Recording Start END 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 M 0000-0000 WREC Quality Best Audio OFF ALM Type ALM Duration Alarm / Motion RecordingPRE- Alarm OFF Motion Setting Main Alarm REC Enable Alarm / Motion ALM Operation REC RateBelow Externally triggered RecordingSearch to play back a particular recorded video Operation Status From REC mode to Playback modePlayback Operations Fast Forward/ReversePlayback Picture-by-picture Slow Forward/ ReversePlay Back Recorded Video from a HDD of the mobile rack Search Operations Search Full List Alarm List Time Search Thumbnail SD CardFull List Search Time Search Alarm list SearchSD Card Search Thumbnail SearchMM DD Year 03 / 13 F0000.JPG F0001.JPG F0002.JPG F0003.JPG F0004.JPG F0005.JPG Backup OperationsMobile Rack HD Backup Operations Set HD 2 to Backup first. Take the following stepsSelect Duplicate a particular recorded video from HD1 to HD2 FullDisk Setting Reformat HD2 Usage Security Digital Card SD Card Backup OperationsSave to F0000.JPG Save to F0001.JPG Save to F000N.JPG Archive video of AVI Clips into SD Card For more detail Backup the System setting info into SD CardSave the whole setting into the SD card Transfer the system setting info of DVR to anotherKey Lock Operation Enter button Set Up Menu Navigation Buttons Setup buttonREC Quality REC SettingAlarm / Motion Setting ALM Type PRE- Alarm 0600-1600 1200-1800 REC Schedule0600-1800 0000-0000 Title Channel 1 2 3 Dwell 03 03 03 03NET Enable NET Enable OFF NET Dhcp NET IP SET FTP Setting MainAccount SET Main SET FTP on / OFF Http Port FTP SettingComm Setting Comm ID 1 SPath AccountFTP Account FTP IP UserHD 1 Backup HD HD2 UsageSystem Situation MAC 00 0c 0c 00 00 Bios Date Mar 10 General Command Format SetupCommunication Protocol Set Time Second Category=0x02 Value of a specific front panel keyDEC HEX Request Time Second Category=0x02Request State Second Category=0x06 REC ModeNon REC Mode DVR Playback ErrorBuilt-in hard disk Jumper settings of hard-disk drives for the system LocationMobile Rack HDD Installation Page Page System Default SET RS232 / RS485 Disk Setting ReformatD. Message Meanings PIN no Network ViewerInstall the Network Viewer for the ZIP file View the 4CH DVR video from a remote PC Page Function Buttons Description Page Set the Record Schedule Change the Record & Timer Properties Via the NetworkSet the regular record settings Set the Alarm record settingsArchive Images to the Computer Image Viewer Point stops recording Previously recorded data remaining 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03Connect to a LAN Hub Intranet Physical specification of RJ-45 cable for EthernetCable Connections Connect to a computerConnect to WAN Internet RJ-45 PIN configuration for LAN HubConfigure Your DVR Network Settings Enable DVR Network FunctionSet IP Address Enable Dhcp FunctionPage 12.3 TCP/IP Communication Software 12.4 TCP/IP installation Click Start Settings Control Panel Network 12.5 TCP/IP Configuration settingClick Start Programs Connection TestingPage Description of functional keys Connecting the 4CH DVRBrowsing images from the 4CH DVR Page Change Record / Alarm Setting Change Timer Record Setting Change Pan/Tilt/Zoom Setting Page Model Number MV-DR4000 Design and specifications subject to change without noticeAppendix 1. -SCANIP