10.1.3View the 4CH DVR video from a remote PC
Once Network View is executed a Login prompt will appear, you must enter the default User Name: admin, password: 9999 into the respective field and click on OK to log into the application.
Follow the instructions below to use the Network Viewer to browse a 4CH DVR video from a remote location. Upon entering the Network Viewer, the connection box will appear as follows.
1.Click the Find tag to connection of the all DVR device in the LAN.
2.Choose a channel number from the Channel
3.Type in the user name for the chosen 4CH DVR.
4.Type in the password of the device and click the Modify tag to add the device to the Device List.
5.Please repeat steps 2 to 4 again for another desire.
6.Select the 4CH DVR to enter this device.
7.Click the Login tag to begin viewing images.
NOTE: Upon connection, the connection status box indicates the name and IP address of the selected device. If there’s a failure to connect, a “Fail” message appears on the screen right after the device IP address; otherwise an “OK” appears. To add more connections or units to the 4CH DVR, please repeat the above instructions.
58