AVE MV DR4000 manual Network Viewer, PIN no

Page 58

10. Network Viewer and Image Viewer

This section provides instructions for installing and using the Network Viewer, and Image Viewer, which are included with the 4CH DVR. The programs can be operated by a selected PC equipped with the following requirements.

1.Intel Pentium 233MHz at least.

2.32 MB RAM

3.Window 95, 98, NT, and ME.

4.4 MB Video card capable of 24-bit true color display.

5.5 MB free hard-disk space for software installation.

6.10-base T network for LAN operation.

10.1The Network Viewer

10.1.1Introduction to Network Viewer

The Network Viewer allows you to potentially access unit of the 4CH DVR from a remote desktop or a laptop in a TCP/IP networking environment. It can perform the following functions.

View live images from the 4CH DVR

Store, search, and review recorded video from the 4CH DVR HDD. Change the regular record, event record, and timer properties.

Before you are ready to view images from a desktop, you need to have your 4CH DVR networked by obtaining a 10 base Ethernet data cable (Standard RJ-45) to connect the 4CH DVR to your LAN/WAN. Now enter the main menu to set the IP address.

RJ-45

MV-DR4000

RJ-45 PIN configuration for Ethernet

PIN NO.

PIN Assignment

1.

TX +

2.

TX -

3.

RX +

4.

Not Connected

5.

Not Connected

6.

RX -

7.

Not Connected

8.

Not Connected

PC

RJ-45 socket

1 2 3 4 5 6 7 8

56

Image 58
Contents AVE Page Safety Precautions Table Of Contents IDE Hard Disk Installation Product Features Product IntroductionHard-disk drive compartment Front ViewHard disk compartment lock Display button Rec IndicatorDisk Indicator Up / Down CH2 / CH1 buttonsJog Dial Mobile Rack Power LEDMobile Rack HDD LED Rear View Between 75Ω and Hi-ZThis Figure is Looked from the Rear View Alarm In/OutRecord in Input This pin Basic Connection Connecting with 1 to 4 CamerasAttaching AN External Device to DVR Seagate Hard-Disk Drive InstallationMaxtor 09- 05-2003 System Information and channel selectionSystem Information Quality Best Ntsc Rate 6 HR Size POSUpdating System Software Ntsc Audio on Configuring Recording SettingsNtsc Audio OFF PAL Audio OFFPAL Audio on Recording Operations Timer RecordingManual Recording Start END 0000-0000 M 0000-0000 W 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000Alarm / Motion ALM Operation REC Rate Alarm / Motion RecordingPRE- Alarm OFF Motion Setting Main Alarm REC Enable REC Quality Best Audio OFF ALM Type ALM DurationExternally triggered Recording BelowFast Forward/Reverse Operation Status From REC mode to Playback modePlayback Operations Search to play back a particular recorded videoPlayback Picture-by-picture Slow Forward/ ReversePlay Back Recorded Video from a HDD of the mobile rack Search Operations Search Full List Alarm List Time Search Thumbnail SD CardFull List Search Alarm list Search Time SearchSD Card Search Thumbnail SearchMM DD Year 03 / 13 Set HD 2 to Backup first. Take the following steps Backup OperationsMobile Rack HD Backup Operations F0000.JPG F0001.JPG F0002.JPG F0003.JPG F0004.JPG F0005.JPGFull Select Duplicate a particular recorded video from HD1 to HD2Disk Setting Reformat HD2 Usage Security Digital Card SD Card Backup OperationsSave to F0000.JPG Save to F0001.JPG Save to F000N.JPG Transfer the system setting info of DVR to another For more detail Backup the System setting info into SD CardSave the whole setting into the SD card Archive video of AVI Clips into SD CardKey Lock Operation Set Up Menu Navigation Buttons Setup button Enter buttonREC Setting REC QualityAlarm / Motion Setting ALM Type PRE- Alarm 0600-1600 1200-1800 REC Schedule0600-1800 0000-0000 Channel 1 2 3 Dwell 03 03 03 03 TitleNET Enable OFF NET Dhcp NET IP SET FTP Setting Main NET Enable1 S Http Port FTP SettingComm Setting Comm ID Account SET Main SET FTP on / OFFUser AccountFTP Account FTP IP PathBackup HD HD2 Usage HD 1System Situation MAC 00 0c 0c 00 00 Bios Date Mar 10 General Command Format SetupCommunication Protocol Request Time Second Category=0x02 Value of a specific front panel keyDEC HEX Set Time Second Category=0x02DVR Playback Error REC ModeNon REC Mode Request State Second Category=0x06Jumper settings of hard-disk drives for the system Location Built-in hard diskMobile Rack HDD Installation Page Page System Default Disk Setting Reformat SET RS232 / RS485D. Message Meanings Network Viewer PIN noInstall the Network Viewer for the ZIP file View the 4CH DVR video from a remote PC Page Function Buttons Description Page Set the Alarm record settings Change the Record & Timer Properties Via the NetworkSet the regular record settings Set the Record ScheduleArchive Images to the Computer Image Viewer 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03 Point stops recording Previously recorded data remainingConnect to a computer Physical specification of RJ-45 cable for EthernetCable Connections Connect to a LAN Hub IntranetEnable DVR Network Function RJ-45 PIN configuration for LAN HubConfigure Your DVR Network Settings Connect to WAN InternetEnable Dhcp Function Set IP AddressPage 12.3 TCP/IP Communication Software 12.4 TCP/IP installation 12.5 TCP/IP Configuration setting Click Start Settings Control Panel NetworkConnection Testing Click Start ProgramsPage Connecting the 4CH DVR Description of functional keysBrowsing images from the 4CH DVR Page Change Record / Alarm Setting Change Timer Record Setting Change Pan/Tilt/Zoom Setting Page Design and specifications subject to change without notice Model Number MV-DR4000Appendix 1. -SCANIP