AVE MV DR4000 manual Playback Operations, Fast Forward/Reverse, Play Back From The Oldest Data

Page 24

4.3 Playback Operations

This section outlines the controls and options available during playback of recorded video. When playing a file, the monitor should display a flashing PLAY message and the PLAY button will light up indicating that the DVR is in the playback status.

To switch between channel 1..4 and quad view in the playback mode, please press CH1 CH 2

CH 3 CH4 and buttons. Besides switching between channels, CH1 CH 2 CH 3 CH4 can also be used to zoom the picture as 2X2 full screen view.

Operation Status

A. From REC mode to Playback mode

(In live mode, directly press the PLAY button to play a latest recorded video)

RECSTOPPLAY……………………………… Play the latest recorded file

Play to the end of the file…Show the ending message (use search functions or rewind to replay the file if required)

STOPPLAY…………Play the file from the stop position

B. Search to play back a particular recorded video

SearchPLAY………………………………………… Play a selected file

Play to the end of the file…………Show the ending message (Search again or rewind

to replay the file if required)

STOPPLAY…………………Play the file from the stop position

C. Play Back From The Oldest Data

Stop: Press the “STOP” button for three secondsPLAY..play back from the beginning of the HDD recorded data

4.3.1 Fast Forward/Reverse

There are 7 speeds available for playback: 1x, 2x, 4x, 8x, 16x, 30x and 100x

While playing back recorded video at recorded speed:

Forward: Turn the Shuttle dial to the right to view the recorded video in the forward direction at a speed faster than the recorded speed. Each subsequent turn of the shuttle to the right increases the forward rate, as 2x, 4x, 8x, 16x, 30x and 100x.

Reverse: Turn the Shuttle dial to the left to view the recorded video in the reverse direction at a speed faster than the recorded speed. Each subsequent turn of the shuttle to the left increases the reverse rate, as -1x, -2x, -4x, -8x, -16x, -30x and -100x.

Normal: Release the Shuttle dial to return to the normal speed of playback.

22

Image 24
Contents AVE Page Safety Precautions Table Of Contents IDE Hard Disk Installation Product Features Product IntroductionFront View Hard-disk drive compartmentHard disk compartment lock Rec Indicator Disk IndicatorDisplay button Up / Down CH2 / CH1 buttonsMobile Rack Power LED Jog DialMobile Rack HDD LED Rear View Between 75Ω and Hi-ZAlarm In/Out This Figure is Looked from the Rear ViewRecord in Input This pin Connecting with 1 to 4 Cameras Basic ConnectionAttaching AN External Device to DVR Hard-Disk Drive Installation SeagateMaxtor System Information and channel selection 09- 05-2003System Information Quality Best Ntsc Rate 6 HR Size POSUpdating System Software Configuring Recording Settings Ntsc Audio OFFNtsc Audio on PAL Audio OFFPAL Audio on Timer Recording Recording OperationsManual Recording Start END 0000-0000 M 0000-0000 W 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000Alarm / Motion Recording PRE- Alarm OFF Motion Setting Main Alarm REC EnableAlarm / Motion ALM Operation REC Rate REC Quality Best Audio OFF ALM Type ALM DurationExternally triggered Recording BelowOperation Status From REC mode to Playback mode Playback OperationsFast Forward/Reverse Search to play back a particular recorded videoSlow Forward/ Reverse Playback Picture-by-picturePlay Back Recorded Video from a HDD of the mobile rack Search Full List Alarm List Time Search Thumbnail SD Card Search OperationsFull List Search Alarm list Search Time SearchThumbnail Search SD Card SearchMM DD Year 03 / 13 Backup Operations Mobile Rack HD Backup OperationsSet HD 2 to Backup first. Take the following steps F0000.JPG F0001.JPG F0002.JPG F0003.JPG F0004.JPG F0005.JPGFull Select Duplicate a particular recorded video from HD1 to HD2Security Digital Card SD Card Backup Operations Disk Setting Reformat HD2 UsageSave to F0000.JPG Save to F0001.JPG Save to F000N.JPG For more detail Backup the System setting info into SD Card Save the whole setting into the SD cardTransfer the system setting info of DVR to another Archive video of AVI Clips into SD CardKey Lock Operation Set Up Menu Navigation Buttons Setup button Enter buttonREC Setting REC QualityAlarm / Motion Setting ALM Type PRE- Alarm REC Schedule 0600-1600 1200-18000600-1800 0000-0000 Channel 1 2 3 Dwell 03 03 03 03 TitleNET Enable OFF NET Dhcp NET IP SET FTP Setting Main NET EnableHttp Port FTP Setting Comm Setting Comm ID1 S Account SET Main SET FTP on / OFFAccount FTP Account FTP IPUser PathBackup HD HD2 Usage HD 1System Situation MAC 00 0c 0c 00 00 Bios Date Mar 10 Setup General Command FormatCommunication Protocol Value of a specific front panel key DEC HEXRequest Time Second Category=0x02 Set Time Second Category=0x02REC Mode Non REC ModeDVR Playback Error Request State Second Category=0x06Jumper settings of hard-disk drives for the system Location Built-in hard diskMobile Rack HDD Installation Page Page System Default Disk Setting Reformat SET RS232 / RS485D. Message Meanings Network Viewer PIN noInstall the Network Viewer for the ZIP file View the 4CH DVR video from a remote PC Page Function Buttons Description Page Change the Record & Timer Properties Via the Network Set the regular record settingsSet the Alarm record settings Set the Record ScheduleArchive Images to the Computer Image Viewer 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03 Point stops recording Previously recorded data remainingPhysical specification of RJ-45 cable for Ethernet Cable ConnectionsConnect to a computer Connect to a LAN Hub IntranetRJ-45 PIN configuration for LAN Hub Configure Your DVR Network SettingsEnable DVR Network Function Connect to WAN InternetEnable Dhcp Function Set IP AddressPage 12.3 TCP/IP Communication Software 12.4 TCP/IP installation 12.5 TCP/IP Configuration setting Click Start Settings Control Panel NetworkConnection Testing Click Start ProgramsPage Connecting the 4CH DVR Description of functional keysBrowsing images from the 4CH DVR Page Change Record / Alarm Setting Change Timer Record Setting Change Pan/Tilt/Zoom Setting Page Design and specifications subject to change without notice Model Number MV-DR4000Appendix 1. -SCANIP