AVE MV DR4000 manual System

Page 45
05/15/03 18:19:32 ON
05/15/03 18:19:32 OFF 05/15/03 18:19:32 REC 05/15/03 18:19:32 STOP 05/15/03 18:19:32 PLAY 05/15/03 18:19:32 V-IN 05/15/03 18:19:32 V-LOSS 05/15/03 18:19:32 P-LOSS

5.6 SYSTEM

This section is used for accessing the history of the operation status, setting the password, resuming factory default, and determining the menu display background.

MAIN MENU

RECORD

ALARM/ MOTION

TIMER/ SEQ/ TITLE

COMMUNICATION

DISK

SYSTEM

GOTO SYSTEM SETTING

OPERATION LOG:

SYSTEM

 

 

: ENTER

OPERATION LOG

MENU BACKGND

: 2

BUZZER

: ON

PASSWORD

: SET

SETUP PWD

: OFF

DEFAULT

: LOAD

SD SETUP

: SAVE

VERSION

: ENTER

MAIN PAGE

VIEW OPERATION LOG

This log shows the history of the operation status in chronological order. What the following entries represent is detailed below.

ON: Powers up the device.

OFF: Powers off the device.

REC: Starts recording.

STOP: Ceases recording.

PLAY: Shows recorded video.

V-IN:Video input is connected.

V-LOSS:Video loss occurs.

P-LOSS:Power interruption occurs.

A-IN:Detects an alarm input.

LOCK: Disables the entire front panel controls.

UNLOCK: Releases the key lock.

UPDATE: Updates system software.

Note: The event log is able to store up to 2000 events. When the log is full, the newly registered record of an operation will replace the existing records from the oldest one.

MENU BACKGND:

There are 3 levels of background color transparency, you can choose from : level 1 is totally transparent, level 3 is opaque, and level 2 is between level 1 and 3. The background color is used in setup menu and search function.

43

Image 45
Contents AVE Page Safety Precautions Table Of Contents IDE Hard Disk Installation Product Introduction Product FeaturesFront View Hard-disk drive compartmentHard disk compartment lock Disk Indicator Rec IndicatorDisplay button Up / Down CH2 / CH1 buttonsMobile Rack Power LED Jog DialMobile Rack HDD LED Between 75Ω and Hi-Z Rear ViewAlarm In/Out This Figure is Looked from the Rear ViewRecord in Input This pin Connecting with 1 to 4 Cameras Basic ConnectionAttaching AN External Device to DVR Hard-Disk Drive Installation SeagateMaxtor System Information and channel selection 09- 05-2003System Information Size POS Quality Best Ntsc Rate 6 HRUpdating System Software Ntsc Audio OFF Configuring Recording SettingsNtsc Audio on PAL Audio OFFPAL Audio on Timer Recording Recording OperationsManual Recording Start END 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 M 0000-0000 WPRE- Alarm OFF Motion Setting Main Alarm REC Enable Alarm / Motion RecordingAlarm / Motion ALM Operation REC Rate REC Quality Best Audio OFF ALM Type ALM DurationBelow Externally triggered RecordingPlayback Operations Operation Status From REC mode to Playback modeFast Forward/Reverse Search to play back a particular recorded videoSlow Forward/ Reverse Playback Picture-by-picturePlay Back Recorded Video from a HDD of the mobile rack Search Full List Alarm List Time Search Thumbnail SD Card Search OperationsFull List Search Time Search Alarm list SearchThumbnail Search SD Card SearchMM DD Year 03 / 13 Mobile Rack HD Backup Operations Backup OperationsSet HD 2 to Backup first. Take the following steps F0000.JPG F0001.JPG F0002.JPG F0003.JPG F0004.JPG F0005.JPGSelect Duplicate a particular recorded video from HD1 to HD2 FullSecurity Digital Card SD Card Backup Operations Disk Setting Reformat HD2 UsageSave to F0000.JPG Save to F0001.JPG Save to F000N.JPG Save the whole setting into the SD card For more detail Backup the System setting info into SD CardTransfer the system setting info of DVR to another Archive video of AVI Clips into SD CardKey Lock Operation Enter button Set Up Menu Navigation Buttons Setup buttonREC Quality REC SettingAlarm / Motion Setting ALM Type PRE- Alarm REC Schedule 0600-1600 1200-18000600-1800 0000-0000 Title Channel 1 2 3 Dwell 03 03 03 03NET Enable NET Enable OFF NET Dhcp NET IP SET FTP Setting Main Comm Setting Comm ID Http Port FTP Setting 1 S Account SET Main SET FTP on / OFFFTP Account FTP IP AccountUser PathHD 1 Backup HD HD2 UsageSystem Situation MAC 00 0c 0c 00 00 Bios Date Mar 10 Setup General Command FormatCommunication Protocol DEC HEX Value of a specific front panel keyRequest Time Second Category=0x02 Set Time Second Category=0x02Non REC Mode REC ModeDVR Playback Error Request State Second Category=0x06Built-in hard disk Jumper settings of hard-disk drives for the system LocationMobile Rack HDD Installation Page Page System Default SET RS232 / RS485 Disk Setting ReformatD. Message Meanings PIN no Network ViewerInstall the Network Viewer for the ZIP file View the 4CH DVR video from a remote PC Page Function Buttons Description Page Set the regular record settings Change the Record & Timer Properties Via the NetworkSet the Alarm record settings Set the Record ScheduleArchive Images to the Computer Image Viewer Point stops recording Previously recorded data remaining 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03Cable Connections Physical specification of RJ-45 cable for EthernetConnect to a computer Connect to a LAN Hub IntranetConfigure Your DVR Network Settings RJ-45 PIN configuration for LAN HubEnable DVR Network Function Connect to WAN InternetSet IP Address Enable Dhcp FunctionPage 12.3 TCP/IP Communication Software 12.4 TCP/IP installation Click Start Settings Control Panel Network 12.5 TCP/IP Configuration settingClick Start Programs Connection TestingPage Description of functional keys Connecting the 4CH DVRBrowsing images from the 4CH DVR Page Change Record / Alarm Setting Change Timer Record Setting Change Pan/Tilt/Zoom Setting Page Model Number MV-DR4000 Design and specifications subject to change without noticeAppendix 1. -SCANIP