AVE MV DR4000 manual Alarm / Motion Setting

Page 36

5.2 ALARM / MOTION SETTING

This menu allows users to program the configuration of alarm recording only when an alarm input is activated. The device will record as long as the alarm input is activated.

MAIN MENU

RECORD

ALARM/ MOTION

TIMER/ SEQ/ TITLE

COMMUNICATION

DISK

SYSTEM

GOTO ALARM / MOTION PAGE

ALM OPERATION:

ALARM / MOTION

ALM OPERATION

 

: OFF

REC RATE

 

: 10F/S

REC QUALITY

: BEST

AUDIO

: OFF

ALM TYPE

: NO

ALM DURATION

: 0 SEC

PRE- ALARM

: OFF

MOTION SETTING

 

MAIN PAGE

 

ALARM REC ENABLE

 

This option determines whether to activate/deactivate the alarm recording when it detects an alarm input. ON: The device activates the alarm recording when it detects an alarm input.

OFF: The device ignores the alarm signal when it detects an alarm input.

REC RATE:

This option is for the purpose of adjusting the number of pictures recorded every second into a storage disk when an alarm input is activated. For a NTSC unit, there are 5 different record speeds you can select from: 30F/S (30 frames per second), 15F/S, 10F/S, 6F/S, and REMAIN. For a PAL unit, there are 5 different record speeds you can select from: 25F/S (25 frames per second), 12.5F/S, 8.3F/S, 5F/S, and REMAIN. If you select REMAIN for use, the device will record images at the same speed as set on the REC page.

REC QUALITY:

This option determines the image quality to be recorded when an alarm input occurs. There are 4 levels of image quality to choose from: BEST, HIGH, STANDARD, and BASIC. The table below shows the level of image quality with the corresponding compression ratio and image size for every 4 pictures(CH1 ~ CH4 )

Image Quality

 

Compression Ratio

 

Best

High

Standard

Basic

 

Image Size

60KB

50KB

40KB

32KB

 

 

 

 

 

AUDIO:

This option determines the way to record sound if necessary.

ON: Enables AUDIO recording.

OFF: Disables AUDIO recording.

NOTE: Audio function can only be activated in the following refresh rate in NTSC(PAL): 10(8.3), 6(5), 2.7(2.7), 1.2(1.4), 0.61(0.76), 0.35(0.44) frames/sec

34

Image 36
Contents AVE Page Safety Precautions Table Of Contents IDE Hard Disk Installation Product Features Product IntroductionFront View Hard-disk drive compartmentHard disk compartment lock Rec Indicator Disk IndicatorDisplay button Up / Down CH2 / CH1 buttonsMobile Rack Power LED Jog DialMobile Rack HDD LED Rear View Between 75Ω and Hi-ZAlarm In/Out This Figure is Looked from the Rear ViewRecord in Input This pin Connecting with 1 to 4 Cameras Basic ConnectionAttaching AN External Device to DVR Hard-Disk Drive Installation SeagateMaxtor System Information and channel selection 09- 05-2003System Information Quality Best Ntsc Rate 6 HR Size POSUpdating System Software Configuring Recording Settings Ntsc Audio OFFNtsc Audio on PAL Audio OFFPAL Audio on Timer Recording Recording OperationsManual Recording Start END 0000-0000 M 0000-0000 W 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000Alarm / Motion Recording PRE- Alarm OFF Motion Setting Main Alarm REC EnableAlarm / Motion ALM Operation REC Rate REC Quality Best Audio OFF ALM Type ALM DurationExternally triggered Recording BelowOperation Status From REC mode to Playback mode Playback OperationsFast Forward/Reverse Search to play back a particular recorded videoSlow Forward/ Reverse Playback Picture-by-picturePlay Back Recorded Video from a HDD of the mobile rack Search Full List Alarm List Time Search Thumbnail SD Card Search OperationsFull List Search Alarm list Search Time SearchThumbnail Search SD Card SearchMM DD Year 03 / 13 Backup Operations Mobile Rack HD Backup OperationsSet HD 2 to Backup first. Take the following steps F0000.JPG F0001.JPG F0002.JPG F0003.JPG F0004.JPG F0005.JPGFull Select Duplicate a particular recorded video from HD1 to HD2Security Digital Card SD Card Backup Operations Disk Setting Reformat HD2 UsageSave to F0000.JPG Save to F0001.JPG Save to F000N.JPG For more detail Backup the System setting info into SD Card Save the whole setting into the SD cardTransfer the system setting info of DVR to another Archive video of AVI Clips into SD CardKey Lock Operation Set Up Menu Navigation Buttons Setup button Enter buttonREC Setting REC QualityAlarm / Motion Setting ALM Type PRE- Alarm REC Schedule 0600-1600 1200-18000600-1800 0000-0000 Channel 1 2 3 Dwell 03 03 03 03 TitleNET Enable OFF NET Dhcp NET IP SET FTP Setting Main NET EnableHttp Port FTP Setting Comm Setting Comm ID1 S Account SET Main SET FTP on / OFFAccount FTP Account FTP IPUser PathBackup HD HD2 Usage HD 1System Situation MAC 00 0c 0c 00 00 Bios Date Mar 10 Setup General Command FormatCommunication Protocol Value of a specific front panel key DEC HEXRequest Time Second Category=0x02 Set Time Second Category=0x02REC Mode Non REC ModeDVR Playback Error Request State Second Category=0x06Jumper settings of hard-disk drives for the system Location Built-in hard diskMobile Rack HDD Installation Page Page System Default Disk Setting Reformat SET RS232 / RS485D. Message Meanings Network Viewer PIN noInstall the Network Viewer for the ZIP file View the 4CH DVR video from a remote PC Page Function Buttons Description Page Change the Record & Timer Properties Via the Network Set the regular record settingsSet the Alarm record settings Set the Record ScheduleArchive Images to the Computer Image Viewer 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03 Point stops recording Previously recorded data remainingPhysical specification of RJ-45 cable for Ethernet Cable ConnectionsConnect to a computer Connect to a LAN Hub IntranetRJ-45 PIN configuration for LAN Hub Configure Your DVR Network SettingsEnable DVR Network Function Connect to WAN InternetEnable Dhcp Function Set IP AddressPage 12.3 TCP/IP Communication Software 12.4 TCP/IP installation 12.5 TCP/IP Configuration setting Click Start Settings Control Panel NetworkConnection Testing Click Start ProgramsPage Connecting the 4CH DVR Description of functional keysBrowsing images from the 4CH DVR Page Change Record / Alarm Setting Change Timer Record Setting Change Pan/Tilt/Zoom Setting Page Design and specifications subject to change without notice Model Number MV-DR4000Appendix 1. -SCANIP