AVE MV DR4000 manual NET Enable OFF NET Dhcp NET IP SET FTP Setting Main

Page 41

5.4 COMMUNICATION

This option allows you to configure the Ethernet settings when connected to a LAN/WAN as well as RS-232/485 protocols if connected to an external control device.

MAIN MENU

RECORD

ALARM/ MOTION

TIMER/ SEQ/ TITLE

COMMUNICATION

DISK

SYSTEM

GOTO COMM PAGE

COMM ID:

COMM SETTING

COMM ID	: 01
RS232	: ON
RS485	: ON
NET ENABLE	: OFF
NET DHCP	: OFF
NET IP	: SET

FTP SETTING

MAIN PAGE

SET RS232 / RS485 ID

Communication ID for RS232 and RS485 communication. After the 4CH DVR receives a RS232 or RS485 command, it checks if the <Dest ID> within the code is the same as the COMM ID, in which case the particular command can be accept.

RS-232:

The RS-232 communication port can be either in an importing or exporting mode according to your applications.

ON: Enables the RS-232 communication port. When you wish the unit to be controlled by an external device, please select this entry for use.

OFF: Disables the RS-232 communication port.

RS-485:

The RS-485 communication port can be either in an importing or exporting mode according to your applications.

ON: Enables the RS-485 communication port. When you wish the unit to be controlled by an external device, please select this entry for use.

OFF: Disables the RS-485 communication port.

NET ENABLE:

This option selects either enable or disable for the Ethernet communication port. OFF:Disables it.

ON: Enables it.

39

Image 41

Contents AVE Page Safety Precautions Table Of Contents IDE Hard Disk Installation Product Introduction Product FeaturesHard disk compartment lock Front ViewHard-disk drive compartment Disk Indicator Rec IndicatorDisplay button Up / Down CH2 / CH1 buttonsMobile Rack HDD LED Mobile Rack Power LEDJog Dial Between 75Ω and Hi-Z Rear ViewRecord in Input This pin Alarm In/OutThis Figure is Looked from the Rear View Attaching AN External Device to DVR Connecting with 1 to 4 CamerasBasic Connection Maxtor Hard-Disk Drive InstallationSeagate System Information System Information and channel selection09- 05-2003 Size POS Quality Best Ntsc Rate 6 HRUpdating System Software Ntsc Audio OFF Configuring Recording SettingsNtsc Audio on PAL Audio OFFPAL Audio on Manual Recording Timer RecordingRecording Operations Start END 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 M 0000-0000 WPRE- Alarm OFF Motion Setting Main Alarm REC Enable Alarm / Motion RecordingAlarm / Motion ALM Operation REC Rate REC Quality Best Audio OFF ALM Type ALM DurationBelow Externally triggered RecordingPlayback Operations Operation Status From REC mode to Playback modeFast Forward/Reverse Search to play back a particular recorded videoPlay Back Recorded Video from a HDD of the mobile rack Slow Forward/ ReversePlayback Picture-by-picture Full List Search Search Full List Alarm List Time Search Thumbnail SD CardSearch Operations Time Search Alarm list SearchMM DD Year 03 / 13 Thumbnail SearchSD Card Search Mobile Rack HD Backup Operations Backup OperationsSet HD 2 to Backup first. Take the following steps F0000.JPG F0001.JPG F0002.JPG F0003.JPG F0004.JPG F0005.JPGSelect Duplicate a particular recorded video from HD1 to HD2 FullSave to F0000.JPG Save to F0001.JPG Save to F000N.JPG Security Digital Card SD Card Backup OperationsDisk Setting Reformat HD2 Usage Save the whole setting into the SD card For more detail Backup the System setting info into SD CardTransfer the system setting info of DVR to another Archive video of AVI Clips into SD CardKey Lock Operation Enter button Set Up Menu Navigation Buttons Setup buttonREC Quality REC SettingAlarm / Motion Setting ALM Type PRE- Alarm 0600-1800 0000-0000 REC Schedule0600-1600 1200-1800 Title Channel 1 2 3 Dwell 03 03 03 03NET Enable NET Enable OFF NET Dhcp NET IP SET FTP Setting MainComm Setting Comm ID Http Port FTP Setting1 S Account SET Main SET FTP on / OFFFTP Account FTP IP AccountUser PathHD 1 Backup HD HD2 UsageSystem Situation MAC 00 0c 0c 00 00 Bios Date Mar 10 Communication Protocol SetupGeneral Command Format DEC HEX Value of a specific front panel keyRequest Time Second Category=0x02 Set Time Second Category=0x02Non REC Mode REC ModeDVR Playback Error Request State Second Category=0x06Built-in hard disk Jumper settings of hard-disk drives for the system LocationMobile Rack HDD Installation Page Page System Default SET RS232 / RS485 Disk Setting ReformatD. Message Meanings PIN no Network ViewerInstall the Network Viewer for the ZIP file View the 4CH DVR video from a remote PC Page Function Buttons Description Page Set the regular record settings Change the Record & Timer Properties Via the NetworkSet the Alarm record settings Set the Record ScheduleArchive Images to the Computer Image Viewer Point stops recording Previously recorded data remaining 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03Cable Connections Physical specification of RJ-45 cable for EthernetConnect to a computer Connect to a LAN Hub IntranetConfigure Your DVR Network Settings RJ-45 PIN configuration for LAN HubEnable DVR Network Function Connect to WAN InternetSet IP Address Enable Dhcp FunctionPage 12.3 TCP/IP Communication Software 12.4 TCP/IP installation Click Start Settings Control Panel Network 12.5 TCP/IP Configuration settingClick Start Programs Connection TestingPage Description of functional keys Connecting the 4CH DVRBrowsing images from the 4CH DVR Page Change Record / Alarm Setting Change Timer Record Setting Change Pan/Tilt/Zoom Setting Page Model Number MV-DR4000 Design and specifications subject to change without noticeAppendix 1. -SCANIP