AVE MV DR4000 Display button, Up / Down CH2 / CH1 buttons, Enter / Quad Button, Seq./Save button

Page 8

POWER button:

Press and hold POWER button for 3 seconds to turn on the unit, press (and hold again) to turn the unit off.

DISPLAY button:

Press to show the system operation status on the screen. (See Section 3.3 for Display indications) Setup button:

Press this to enter the setup menu. Press again to exit the setup mode. Search button:

Press the SEARCH to enter the search mode to access recorded video. Left / Right (CH3 / CH4 ) buttons:

In setup menu/ search mode, use these buttons scroll Left/Right to select desired items in the menu setup mode.

In live mode, use these buttons to select channel 3 or 4 for display.

In play mode, use these buttons to select a channel 3 or 4 as well as zoom in on the desired channel.

Up / Down ( CH2 / CH1 )buttons:

In setup menu/ search mode, use these buttons to scroll Up/Down to select the desired items options for programming.

In live mode, use these buttons to select channel 2 or 1 for display.

In play mode, use these buttons to select a channel 2 or 1 as well as zoom in on the desired channel.

Enter / (Quad) Button:

Press the ENTER button to select or enter an item while in the setup menu.

When changing a value within the setup menu, press the ENTER to save the change. This button also switches to the 4 camera view during live or playback viewing.

Seq./Save button:

In live mode, press to begin sequential switching of the live cameras. The view will rotate through all cameras following the programmed dwell time.

In SD card backup mode, press to save the desired still image to SD card.

T-rec Indicator:

This indicator LED will turn ON to signal that the schedule/timer record setting is enabled.

A-rec Indicator:

This indicator LED will turn ON to signal that the alarm record setting is enabled.

DISK Indicator:

The indicator shows the operation status of the unit’s hard-disk drives. The green light indicates the hard-disk drive is storing or retrieving data. The red light signals the hard-disk drive is filling up. The orange light indicates the hard disk is retrieving at disk-full status.

Shuttle Ring:

The shuttle ring is used to playback video at different speeds in forward or reverse. Turning the shuttle ring to the left will play recorded video in reverse, turning the shuttle ring to the right will play the video at different speeds in the forward direction.

6

Image 8
Contents AVE Page Safety Precautions Table Of Contents IDE Hard Disk Installation Product Features Product IntroductionHard disk compartment lock Front ViewHard-disk drive compartment Rec Indicator Disk IndicatorDisplay button Up / Down CH2 / CH1 buttonsMobile Rack HDD LED Mobile Rack Power LEDJog Dial Rear View Between 75Ω and Hi-ZRecord in Input This pin Alarm In/OutThis Figure is Looked from the Rear View Attaching AN External Device to DVR Connecting with 1 to 4 CamerasBasic Connection Maxtor Hard-Disk Drive InstallationSeagate System Information System Information and channel selection09- 05-2003 Quality Best Ntsc Rate 6 HR Size POSUpdating System Software Configuring Recording Settings Ntsc Audio OFFNtsc Audio on PAL Audio OFFPAL Audio on Manual Recording Timer RecordingRecording Operations Start END 0000-0000 M 0000-0000 W 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000Alarm / Motion Recording PRE- Alarm OFF Motion Setting Main Alarm REC EnableAlarm / Motion ALM Operation REC Rate REC Quality Best Audio OFF ALM Type ALM DurationExternally triggered Recording BelowOperation Status From REC mode to Playback mode Playback OperationsFast Forward/Reverse Search to play back a particular recorded videoPlay Back Recorded Video from a HDD of the mobile rack Slow Forward/ ReversePlayback Picture-by-picture Full List Search Search Full List Alarm List Time Search Thumbnail SD CardSearch Operations Alarm list Search Time SearchMM DD Year 03 / 13 Thumbnail SearchSD Card Search Backup Operations Mobile Rack HD Backup OperationsSet HD 2 to Backup first. Take the following steps F0000.JPG F0001.JPG F0002.JPG F0003.JPG F0004.JPG F0005.JPGFull Select Duplicate a particular recorded video from HD1 to HD2Save to F0000.JPG Save to F0001.JPG Save to F000N.JPG Security Digital Card SD Card Backup OperationsDisk Setting Reformat HD2 Usage For more detail Backup the System setting info into SD Card Save the whole setting into the SD cardTransfer the system setting info of DVR to another Archive video of AVI Clips into SD CardKey Lock Operation Set Up Menu Navigation Buttons Setup button Enter buttonREC Setting REC QualityAlarm / Motion Setting ALM Type PRE- Alarm 0600-1800 0000-0000 REC Schedule0600-1600 1200-1800 Channel 1 2 3 Dwell 03 03 03 03 TitleNET Enable OFF NET Dhcp NET IP SET FTP Setting Main NET EnableHttp Port FTP Setting Comm Setting Comm ID1 S Account SET Main SET FTP on / OFFAccount FTP Account FTP IPUser PathBackup HD HD2 Usage HD 1System Situation MAC 00 0c 0c 00 00 Bios Date Mar 10 Communication Protocol SetupGeneral Command Format Value of a specific front panel key DEC HEXRequest Time Second Category=0x02 Set Time Second Category=0x02REC Mode Non REC ModeDVR Playback Error Request State Second Category=0x06Jumper settings of hard-disk drives for the system Location Built-in hard diskMobile Rack HDD Installation Page Page System Default Disk Setting Reformat SET RS232 / RS485D. Message Meanings Network Viewer PIN noInstall the Network Viewer for the ZIP file View the 4CH DVR video from a remote PC Page Function Buttons Description Page Change the Record & Timer Properties Via the Network Set the regular record settingsSet the Alarm record settings Set the Record ScheduleArchive Images to the Computer Image Viewer 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03 Point stops recording Previously recorded data remainingPhysical specification of RJ-45 cable for Ethernet Cable ConnectionsConnect to a computer Connect to a LAN Hub IntranetRJ-45 PIN configuration for LAN Hub Configure Your DVR Network SettingsEnable DVR Network Function Connect to WAN InternetEnable Dhcp Function Set IP AddressPage 12.3 TCP/IP Communication Software 12.4 TCP/IP installation 12.5 TCP/IP Configuration setting Click Start Settings Control Panel NetworkConnection Testing Click Start ProgramsPage Connecting the 4CH DVR Description of functional keysBrowsing images from the 4CH DVR Page Change Record / Alarm Setting Change Timer Record Setting Change Pan/Tilt/Zoom Setting Page Design and specifications subject to change without notice Model Number MV-DR4000Appendix 1. -SCANIP