AVE MV DR4000 manual Jog Dial, Mobile Rack Power LED, Mobile Rack HDD LED

Page 9

Jog Dial:

The Jog Dial can be used to step frame by frame in the forward or reverse direction. SD CARD Slot:

This is used for system software updating and archiving/accessing critical images.

Mobile Rack Power LED:

Indicates the power status of the Mobile Rack. The green light indicates the Mobile Rack is activate.

Mobile Rack HDD LED:

Indicates the HDD status of the Mobile Rack. The orange light indicates the HDD is storing or retrieving data.

7

Image 9

Contents AVE Page Safety Precautions Table Of Contents IDE Hard Disk Installation Product Introduction Product FeaturesFront View Hard-disk drive compartmentHard disk compartment lock Disk Indicator Rec IndicatorDisplay button Up / Down CH2 / CH1 buttonsMobile Rack Power LED Jog DialMobile Rack HDD LED Between 75Ω and Hi-Z Rear ViewAlarm In/Out This Figure is Looked from the Rear ViewRecord in Input This pin Connecting with 1 to 4 Cameras Basic ConnectionAttaching AN External Device to DVR Hard-Disk Drive Installation SeagateMaxtor System Information and channel selection 09- 05-2003System Information Size POS Quality Best Ntsc Rate 6 HRUpdating System Software Ntsc Audio OFF Configuring Recording SettingsNtsc Audio on PAL Audio OFFPAL Audio on Timer Recording Recording OperationsManual Recording Start END 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 M 0000-0000 WPRE- Alarm OFF Motion Setting Main Alarm REC Enable Alarm / Motion RecordingAlarm / Motion ALM Operation REC Rate REC Quality Best Audio OFF ALM Type ALM DurationBelow Externally triggered RecordingPlayback Operations Operation Status From REC mode to Playback modeFast Forward/Reverse Search to play back a particular recorded videoSlow Forward/ Reverse Playback Picture-by-picturePlay Back Recorded Video from a HDD of the mobile rack Search Full List Alarm List Time Search Thumbnail SD Card Search OperationsFull List Search Time Search Alarm list SearchThumbnail Search SD Card SearchMM DD Year 03 / 13 Mobile Rack HD Backup Operations Backup OperationsSet HD 2 to Backup first. Take the following steps F0000.JPG F0001.JPG F0002.JPG F0003.JPG F0004.JPG F0005.JPGSelect Duplicate a particular recorded video from HD1 to HD2 FullSecurity Digital Card SD Card Backup Operations Disk Setting Reformat HD2 UsageSave to F0000.JPG Save to F0001.JPG Save to F000N.JPG Save the whole setting into the SD card For more detail Backup the System setting info into SD CardTransfer the system setting info of DVR to another Archive video of AVI Clips into SD CardKey Lock Operation Enter button Set Up Menu Navigation Buttons Setup buttonREC Quality REC SettingAlarm / Motion Setting ALM Type PRE- Alarm REC Schedule 0600-1600 1200-18000600-1800 0000-0000 Title Channel 1 2 3 Dwell 03 03 03 03NET Enable NET Enable OFF NET Dhcp NET IP SET FTP Setting MainComm Setting Comm ID Http Port FTP Setting1 S Account SET Main SET FTP on / OFFFTP Account FTP IP AccountUser PathHD 1 Backup HD HD2 UsageSystem Situation MAC 00 0c 0c 00 00 Bios Date Mar 10 Setup General Command FormatCommunication Protocol DEC HEX Value of a specific front panel keyRequest Time Second Category=0x02 Set Time Second Category=0x02Non REC Mode REC ModeDVR Playback Error Request State Second Category=0x06Built-in hard disk Jumper settings of hard-disk drives for the system LocationMobile Rack HDD Installation Page Page System Default SET RS232 / RS485 Disk Setting ReformatD. Message Meanings PIN no Network ViewerInstall the Network Viewer for the ZIP file View the 4CH DVR video from a remote PC Page Function Buttons Description Page Set the regular record settings Change the Record & Timer Properties Via the NetworkSet the Alarm record settings Set the Record ScheduleArchive Images to the Computer Image Viewer Point stops recording Previously recorded data remaining 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03Cable Connections Physical specification of RJ-45 cable for EthernetConnect to a computer Connect to a LAN Hub IntranetConfigure Your DVR Network Settings RJ-45 PIN configuration for LAN HubEnable DVR Network Function Connect to WAN InternetSet IP Address Enable Dhcp FunctionPage 12.3 TCP/IP Communication Software 12.4 TCP/IP installation Click Start Settings Control Panel Network 12.5 TCP/IP Configuration settingClick Start Programs Connection TestingPage Description of functional keys Connecting the 4CH DVRBrowsing images from the 4CH DVR Page Change Record / Alarm Setting Change Timer Record Setting Change Pan/Tilt/Zoom Setting Page Model Number MV-DR4000 Design and specifications subject to change without noticeAppendix 1. -SCANIP