
A. Malfunction to the belt buckle
•When opening the belt buckle, the buckle sections are released slowly.
•The belt buckle can only be opened with considerable force.
•It is difficult to click the buckle sections into the buckle (too much resistance).
•The buckle will no longer close, the buckle sections will not go together.
•There is no “click” sound when closing the buckle.
B. Solving any problems | GB |
•Check the buckle for any dirt and if necessary clean by knocking the dirt out, rinsing, blowing clean or vacuuming with a vacuum cleaner, for example.
•NOTE! Never use lubricants!
If you are unable to close the belt buckle or if you are unsure whether you have solved the problem correctly, contact your retailer or importer immediately (see back of instruction manual). Under no circumstances should the
5. GENERAL INSTRUCTIONS
Always pay attention to the following…
•Always use the seat, even on short trips close to home, as this is when most accidents occur.
•Only use the
•The
•The seat must always be secured with the seat belt, even when not in use. A loose seat could injure other passengers in an emergency stop.
•Make sure that the
•Never use the
•Always cover up the
•To avoid damage to the fabric, do not remove the logos, etc. on the cover.
•Make sure that there is no baggage or other loose objects (for example on the rear shelf) in the car. In an emergency stop or crash these become dangerous projectiles!
•When making long journeys, make sure to take frequent breaks in order to give your child some room to move.
•Never leave your child alone in the car unattended.
•Keep the user instructions for future reference in the appropriate place at the back of the
•Never use
•The user should not make any modifications to the car seat or the belts. Also labels or warnings, etc. that form part of the seat should not be removed in any circumstances!
•Always replace the
•The manufacturer knows that car seats may cause impressions in car upholstery or car seat belts. These cannot be avoided, since the safety standards demand powerful and firm fastening methods. That is why
the manufacturer cannot be held liable for any damage as a result of these.
And of course …
• Always set a good example and wear your own safety belts!
Instructions for use
13