Aiwa HV-FX9000U operating instructions Adding or erasing VCR channels manually, Catv channels

Setting the VCR channels (continued)

	i/k
	j/l
ENTER/	MENU
DISPLAY

4 Press i or k to select AUTO CHANNEL SET, then press j or l.

All available channels in your area are scanned and stored in the memory of the VCR.

After scanning, the TV screen in step 3 appears.

AUTO CHANNEL SET

PROCEEDING

CHANNEL 11

TO EXIT PRESS MENU

5 Press MENU to return to the normal screen.

If “C” flashes in the display window after Auto Channel Set

Check the antenna connections and repeat the above procedure from step 1.

If you still cannot receive the channels, set the VCR channels manually. See “Adding or erasing VCR channels manually”.

(Presetting the VCR channels is necessary for recording TV programs.)

CATV channels

CATV systems use letters and numerals to designate channels. The table below shows the channel numbers of the CATV system and the corresponding channel number displayed on this VCR. For more information on available channels in your area, consult your local CATV company.

Channels displayed on this VCR		CATV channels
01		5A
02 to	13	2 to 13
14 to	36	A to W
37 to	94	W+1 to W+58
95 to	99	A-5 to A-1
100 to	124	W+59 to W+83
125		W+84

Tips

•When you perform the Auto Channel Set, the VCR automatically selects the band (TV or CATV) in which there

are more channels to be preset. To check the band, press k to select TUNING BAND in the TUNING menu.

•In the display window, “c” is for a CATV channel and “ch” is for a TV channel.

Note

Once you conduct Auto Channel Set, the previous settings will be canceled.

Adding or erasing VCR channels manually

If Auto Channel Set does not set the VCR channel, add them manually for recording TV programs.

You can also erase the unnecessary VCR channels.

1 Press MENU.

2 Press i or k to select TUNING, then press

ENTER/DISPLAY.

CLOCK

PROGRAM

TUNING

SETUP

SELECT ENTER ENTER

TO EXIT PRESS MENU

3 Press i or k to select TUNING BAND, then press j or l to display TV or CATV.

AUTO CHANNEL SET

TUNING BAND :					CATV
CH. ADD / DEL :			CH.23 ADD
SOURCE SELECT :				TUNER
		SELECT	ADJUST
	TO EXIT PRESS			MENU

4 Press i or k to select CH. ADD/DEL.

AUTO CHANNEL SET

TUNING BAND :		CATV
CH. ADD / DEL :	CH. 23 ADD
SOURCE SELECT :		TUNER

ENTER ADD / DELETE

SELECT ADJUST

TO EXIT PRESS MENU

5 Press j or l to select the channel to be erased or added.

When the selected channel has already been set, ADD appears. When it has not been set, DEL appears.

AUTO CHANNEL SET

TUNING BAND :						CATV
CH. ADD / DEL : CH. 25 DEL
SOURCE SELECT :						TUNER
				ADD / DELETE
	ENTER
			SELECT		ADJUST
		TO EXIT PRESS
						MENU

13 ENGLISH