Aiwa HV-FX9000U operating instructions Playing back a MTS-program recorded tape

7 Press MENU to return to the normal screen.

8 Insert a cassette.

9 Press C PLAY. Playback begins.

Output signals

The signals output from the AUDIO OUT jacks and RF OUT to TV connector on the rear panel are as shown below.

Recorded and output signals of the MTS broadcast

			Recorded signal		Signal output
TV					from AUDIO
	Broadcast
screen		BROADCAST	Hi-Fi	Normal	OUT
		TYPE	track	track	LEFT	RIGHT
		STEREO	Mono	Mono	Mono	Mono
MONO	Mono	SAP	Mono	Mono	Mono	Mono
		MONO	Mono	Mono	Mono	Mono
			Left/		Left	Right
		STEREO	Right	Mono
					channel	channel
			channel
STEREO	Stereo		Left/		Left	Right
		SAP	Right	Mono
					channel	channel
			channel
		MONO	Mono	Mono	Mono	Mono
		STEREO	Mono	Mono	Mono	Mono
SAP	Mono+SAP	SAP	SAP	SAP	SAP	SAP
		MONO	Mono	Mono	Mono	Mono
			Left/		Left	Right
		STEREO	Right	Mono
STEREO/					channel	channel
	Stereo+SAP		channel
SAP
		SAP	SAP	SAP	SAP	SAP
		MONO	Mono	Mono	Mono	Mono

4 Press j or l to select the audio output mode.

STEREO: The stereo sound is heard.

LEFT: The left channel sound is heard from both channels.

RIGHT: The right channel sound is heard from both channels.

5 Press i or k to select AUDIO MODE.

FUNCTION OSD :	ON
LANGUAGE SELECT : ENGLISH
AUDIO MODE :	HI-FI
BROADCAST TYPE :	STEREO
AUDIO OUTPUT :	STEREO

CHANNEL MAPPING

SELECT ADJUST

TO EXIT PRESS MENU

6 Press j or l to select HI-FI.

HI-FI:The sound on the Hi-Fi audio track is played back.

NORMAL: The sound on the normal audio track is played back.

Note

You can also use the display window to check the broadcast type.

When the VCR receives the stereo broadcast, ST appears. When the VCR receives the SAP broadcast, SAP appears. When the VCR receives the Bilingual broadcast, BIL appears.

Playing back a MTS-program recorded tape

Before starting

Set the VCR/CATV/DBS/TV selector to VCR.

1 Press MENU.

2 Press i or k to select SETUP, then press

ENTER/DISPLAY.

CLOCK

PROGRAM

TUNING

SETUP

SELECT ENTER ENTER

TO EXIT PRESS MENU

3 Press i or k to select AUDIO OUTPUT.

FUNCTION OSD :	ON
LANGUAGE SELECT : ENGLISH
AUDIO MODE :	HI-FI
BROADCAST TYPE :	STEREO
AUDIO OUTPUT :	STEREO

CHANNEL MAPPING

SELECT ADJUST

TO EXIT PRESS MENU

AUDIO	AUDIO	AUDIO OUT		RF OUT
OUTPUT	MODE	LEFT	RIGHT
STEREO	HI-FI	Left	Right	Mono
		channel	channel
LEFT	HI-FI	Left	Left	Left
		channel	channel	channel
RIGHT	HI-FI	Right	Right	Right
		channel	channel	channel
–	NORMAL	Mono	Mono	Mono

Tips

•If AUDIO OUTPUT is set to STEREO while playing a prerecorded SAP BILINGUAL audio program, the primary language LEFT and the secondary language RIGHT will be heard simultaneously. For SAP BILINGUAL playback, do not use STEREO setting. Select RIGHT setting.

•If the VCR is connected to the TV through the antenna cable, the audio portion of a stereo or SAP BILINGUAL prerecorded tape will be heard in monaural. Set AUDIO OUTPUT to select the desired portion when playing back a SAP BILINGUAL tape. For stereo or SAP BILINGUAL playback, use the connections given on stereo playback.

Notes

•When you play a tape recorded in mono, the sound is always played back in mono regardless of the AUDIO MODE setting.

•The AUDIO MODE setting automatically returns to HI-FI when a cassette is ejected.

ENGLISH 26