Using the MENU Command Sequence
8.5Setting the STORE/RECALL KEYBOARD Mode
Choose one of these STORE/RECALL KEYBOARD modes:
At ONCE mode in which setups are stored/recalled immediately without the need for user confirmation
CONFIRM mode in which storing/recalling setups require user confirmation. The CONFIRM mode is the default1 for storing/recalling setups and is recommended to prevent erroneously storing/recalling of setups
To set the STORE/RECALL KEYBOARD mode to the AT ONCE mode, instead of the CONFIRM (default) mode, do the following:
1.Press the MENU button until reaching the STORE/RECALL setting. The MATRIX Display shows the message:
STORE/RECALL setting
yes -> TAKE, next -> MENU
2.Press the TAKE button and choose the appropriate Outkey 1 for the AT ONCE mode (Outkey 2 is for the CONFIRM mode).
The Displays show the messages:
STO/RCL mode | current: |
changed | At once |
8.6Choosing What to INDICATE
Choose what is displayed during regular operation: between scrolling the switcher setup as Figure 15 illustrates, and showing the IN/OUT range2.
Figure 15: Choosing what to INDICATE
1 The AT ONCE mode is the default for all actions except storing/recalling setups 2 Useful in an expanded matrix configuration
35