Kramer Electronics VS-1616SDI user manual Using the Menu Command Sequence, Setup # xy Load ?

Using the MENU Command Sequence

basis. For example, to enter the # 14, press # 1 followed by # 4 (not # 14). To enter the # 3, press # 3 followed by the TAKE button1.

The memory recalls the setup. The MATRIX Display shows the blinking setup and the TAKE LED blinks. The STATUS Display shows the message:

SETUP # xy

Load ?

Where xy are the OUT buttons.

3.Preview the setup to decide whether to implement it. If not, you can scan the other setups, by pressing different OUT buttons. To stop previewing the setups, press a non-relevant button, for example, an IN button.

4.Press the TAKE button.

The specific setup is implemented.

If trying to recall an empty setup2, the MATRIX Display would show a message saying that that particular setup is empty and would return you to step 1 above.

8Using the MENU Command Sequence

You can press the MENU button up to 11 times in straight sequence to scan the range of commands.

1 Alternatively, pressing # 10 followed by # 3 will also enter the # 3 2 That is, a setup # for which no setup is actually stored

27