Kramer Electronics VS-1616SDI Operating a Single Machine, Your SDI Video Matrix Switcher

Operating a Single Machine

To achieve the best performance:

￿Use only good quality connection cables1 to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables).

￿Avoid interference from neighboring electrical appliances that may adversely influence signal quality and position your VS-1616SDIaway from moisture, excessive sunlight and dust.

4Operating a Single Machine

By default, the VS-1616SDIis setup for use as a single machine. This means that it is:

￿A 16x16 SDI video switcher

￿Switched during the vertical interval of the external analog reference

In particular, be sure that the dipswitches are set as shown in Figure 1 (see section 6￿ .3 for further details). To operate a single machine, see Table 1.

Figure 1: Default Dipswitch Setup on a Single Machine

Table 1: Quick Reference Operating Guide for a Single Machine

To perform this command:	Press:
Connect an input with an output	OUT #; IN #
Clear (disconnect) a specific output	OUT #; OFF
Clear (disconnect) all outputs	ALL; OFF
Connect all outputs to a specific input	ALL; IN #
Store a setup	STO; OUT #; TAKE
Recall a setup	RCL; OUT #; TAKE
Lock front panel	MENU; TAKE
Unlock front panel	TAKE; TAKE
Change default setup	Press the Menu button several times until you reach the
	appropriate Menu setup command and follow the instructions

5Your SDI Video Matrix Switcher

Figure 2 illustrates the front and rear panels of the VS-1616SDI. Tables 1 and 2 define the front and rear panels of the VS-1616SDI, respectively.

1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com

3