Kramer Electronics VS-1616SDI user manual Choosing the Communication Setting

Page 40

Using the MENU Command Sequence

To scroll the switcher setup (instead of showing the IN/OUT range), do the following:

1.Press the MENU button until you reach the “What to INDICATE” command.

The MATRIX Display shows the message:

what to INDICATE

yes -> TAKE, next -> MENU

2. Press the TAKE button.

The Displays show the messages:
Use OUTkey to configure	Current:
1: scroll SETUP 2: OUTs/INs	OUTs/INs

3.Press the OUT button 1.

The TAKE LED blinks and the Displays show the messages:

Scroll switcher setup?	Current:
Press TAKE to execute	OUTs/INs

4.Press the TAKE button.

The Displays show the messages:

display mode	Current:
changed	SETUP

8.7Choosing the COMMUNICATION Setting

Choose the response option (reply or no reply).

To choose the No Reply response option, for example, do the following:

1.Press the MENU button until you reach the COMMUNICATION setting. The MATRIX Display shows the message:

COMMUNICATION setting yes -> TAKE, next -> MENU

2.Press the TAKE button.

The MATRIX Display shows the message:

Use OUTkey to configure 1: REPLY 2: No Reply

3.Press the OUT button 2.

The TAKE LED blinks and the Displays show the messages:

Set serial port No reply	Current:
Press TAKE to execute	Reply

4.Press the TAKE button again. The Displays show the messages:

36	KRAMER: SIMPLE CREATIVE TECHNOLOGY

Image 40

Contents Model Contents Upgrading Flash Memory Figures TablesGetting Started IntroductionOverview Overview Your SDI Video Matrix Switcher Operating a Single MachineVS-1616SDI 16x16 SDI Video Matrix Switcher Feature Function Installing the SDI Video Matrix Switcher Configuring a Standalone SDI Video Matrix SwitcherAssembling a System of Interconnected Switchers Setting the Dipswitches Assembling a System of Interconnected SwitchersSetting the Machine # Understanding the System Mode Connecting a Control Interface Keyboard LockedConnecting a PC to Four Switchers Connecting with a Null-modem Adapter Null-modem adapter Illustrates the RS-485 line that connects An RS-485 Control Interface Setup Configuring the Sync Connecting the Keyboard ExtensionOperating Your SDI Video Matrix Switcher Using the Startup DisplayUsing the Front Panel Buttons Default Startup Status Display SequenceOut # Where x is the output number Out # From in # yAll OUTs Out # Reset Clearing Several Outputs Reset ALL connections Reset ALL ? Press Take to executeStore this Setup ? Enter Setup numberUse two digit # # xy Using the Menu Command Sequence Setup # xy Load ?Sequence of Menu Commands Locking and Unlocking the Front Panel Choosing the System Modes Follow the System Yes TAKE, next MenuChoosing the Switching Method Setting Understanding the Switching Method Settings Switching Method setting Yes TAKE, next Menu NoVIS 2 EXT 3 INT#1 4MTX ExternalChoosing the Extended Keyboard Setting Setting the STORE/RECALL Keyboard Mode STORE/RECALL setting Yes TAKE, next MenuSTO/RCL mode Changed At onceChoosing the Communication Setting Setting the IR Remote Control Choosing the Auto Store Current Setup Identifying the MachineChoosing the Initial Reset Initial Reset Yes TAKE, next MenuOutkey 1 Current status Factory default Reset to factory default Press Take to executeConnecting the PC to the RS-232 Port Upgrading Flash MemoryUpgrading the Firmware Program replaced Ready for receiving Start transmission from PC16608D Technical Specifications Hex CodesHex Table for the VS-1616SDI Video Matrix Switcher Ascii Protocol General Ascii Protocol Description#, i# ExampleOK!! or Error Page 2900-002063 REV