Using the MENU Command Sequence
Table 7: Summary of Basic RC-IR2 Operations
To execute this command: | Press the following keys in this sequence: |
|
|
Switch an Input to an Output | # key (for the output) + # key (for the input)1 |
Store/Recall a setup | SHIFT + STO/RCL + # key (for the setup) |
8.9Choosing the AUTO STORE Current SETUP
Choose whether or not to save the current setup automatically, that is, whether to save the machine’s status on power down, so that it returns to the same status after cycling power.
To save the current setup automatically (when set OFF), do the following:
1.Press the MENU button until you reach the AUTO Store Current SETUP command.
The MATRIX Display shows the message:
AUTO store current SETUP yes
2. Press the TAKE button.
The Displays show the messages: |
|
OUTkey 1: no AutoSave | current: |
2: AutoSave CURRENT setup | NO save |
3.Press the OUT button 2.
The TAKE LED blinks and the Displays show the messages:
Auto store CURRENT setup ? | Current: |
Press TAKE to execute | NO save |
4.Press the TAKE button again. The Displays show the messages:
AUTOSAVE mode | Current: |
changed | AutoSave |
8.10Identifying the MACHINE
Display essential information (the product name and version number) to identify your machine, for example, for technical support purposes.
To identify your machine, do the following:
1 For example, press # 6 followed by # 2 to switch input 2 to output 6
38 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |
|