Enterasys Networks X009-U manual Rack Mounting the Matrix X4-C Chassis

Setting Up the Matrix X4-C Chassis

Rack Mounting the Matrix X4-C Chassis

Note: Read Chapter 2, Site and Configuration Guidelines, before completing the following procedure to ensure that all installation guidelines are met.

To rack‐mount the Matrix X4‐C chassis, proceed as follows:

Warning: We recommend you use a forklift or other mechanical device to lift and hold the chassis.

Advertencia: Para ayudar a prevenir alguna lesión personal, es recommendable que un elevador de carga or algun otro dispositivo se utilice para levantar el chasis.

Warnhinweis: Zum Schutz vor körperlichen Schäden, es wird empfohlen, mittels Gabelstabler oder anderen Hilfsmittein das Chassis anzuheben oder es zu halten.

1.If you installed the optional mid‐mount brackets, skip to Step 3.

2.Lift the chassis onto the support brackets and use 18 screws (nine per side) to secure the chassis to the rack. As shown in Figure 3‐6, start with the bottom holes and work toward the top of the chassis. Chassis rack mounting is now complete.

Figure 3-6 Rack Mounting the Matrix X4-C Chassis

	GROUND	Matrix
S/N:	STRAP
	MAC ADD.	X4
		4
		3
		FAN
		TRAY
FM2		CM2
FM1		CM1
		2
		X4
		FAN
		TRAY
		1
2		2
1		1

1 Rack 2 Rack-mounting screws (9 per side)

3.Using 20 screws, attach the mid‐mounted chassis to the rack, as shown in Figure 3‐7.

3-8 Matrix X4-C Chassis Setup