Installing and Removing a Power Supply
Figure 3-12 Removing Power Supply Vent Plate
| Matrix | ||
| GROUND |
|
|
| STRAP | X4 |
|
S/N: | MAC ADD. |
| |
| 4 |
|
|
| 4 |
|
|
| 3 |
|
|
| 3 | FAN | FAN |
|
| TRAY TRAY | |
| CM2 |
| 2 |
FM2 | CM2 |
|
|
|
|
| |
|
|
| FAN |
|
|
| TRAY |
| CM1 |
| 1 |
FM1 | CM1 |
|
|
| 2 |
|
|
| X4 |
|
|
| 2 |
|
|
| 1 | FAN |
|
| TRAY |
| |
1 |
|
| 2 |
3
4 |
| 4 |
|
1 Power supply slot (PS1) | 2 Power supply coverplate | 3 Vent plate | 4 Captive screws (2) |
6.Locate the PS1 power supply slot, as shown in Figure 3‐12.
7.Hold the power supply by placing one hand on the handle located on the front panel and using your other hand to support the power supply.
8.Position the power supply with captive screw to the right and align with the slot opening.
Caution: Forcing a misaligned power supply into place can damage the power supply or chassis backplane.
Precaución: Colocar de manera forzada una fuente de poder o no colocarla bien alineada podría dañarla y/o maltratar el panel posterior del chasis.
9.With the power supply properly inserted into the opening, carefully slide the module until it connects to the backplane, as shown in Figure 3‐13. The module’s handle should be nearly flush with the face of the Matrix X4‐C chassis. If significant resistance is encountered before the power supply is seated, remove and reinsert it. Do not force the module into place.
Matrix