TRENDnet Outdoor PoE Megapixel Day/Night Internet Camera manual Configuring the Camera Setting

Page 11

TRENDnet User’s Guide

∙Zoom: Enable zoom-in and zoom-out functions. Select “Enable digital zoom” option first within the pop-up dialogue box and then drag and drop the bar to adjust the zoom factors.

∙Frame Buffer mSec: This function is to build a temporary buffer to accumulate several video frames. This function can make video smooth-going when the

Network speed is slow and lag. If you select “100”, then it plays video after 100 mSec when starting receiving images from camera. The slower of the Network is, the bigger value should be selected. The default value is null.

TV-IP302PI

Configuring the Camera Setting

To configure the camera, click on the live screen.

The Web Configuration contains the settings that are required for the camera in the left menu bar, including System Setting, Network Setting, Audio/Video Setting, and Event Setting.

To return to the live screen, please click the button.

© Copyright 2014 TRENDnet. All Rights Reserved.

10

Image 11

Contents TRENDnet User’s Guide Contents Product Overview Package ContentsFeatures Product Hardware FeaturesCamera Connectors Application DiagramShield Installation InstallationHardware Installation Waterproofing Camera InstallationBracket Installation LED IndicatorTV-IP302PI TV-IP302PI Viewing Camera Basic Function Configuration     Configuring the Camera Setting System System Information Server Information System System Information OSD SettingSystem System User Management ∙ Direct Video Stream Authentication System System Information Time SettingSystem Tools ∙ Enable Password Protection∙ Firmware Upgrade ∙ ConfigurationNetwork Network Setting Web Authentication Network Network Setting IP Address SettingNetwork Network Setting IPv6 Setting Network Network Setting Port Setting∙ UPnP Port Forwarding Network Network Setting UPnP ∙ UPnPNetwork Network Setting Rtsp Setting ∙ Rtsp Server ∙ Rtsp Authentication∙ Rtsp Keepalive Network Network Setting OnvifNetwork Network Setting Bonjour ∙ SecurityNetwork Advanced Https Network Advanced Snmp ∙ SNMPv3 ∙ SNMPv1/SNMPv2 Trap Network Advanced QoS/DSCP Network Advanced IP Address Filter∙ PPPoE Network Advanced Ieee Network PPPoE & DdnsDdns Status Network Event Server ∙ Mail Setting∙ Samba Setting ∙ FTP SettingAudio/Video Setting Image Setting TRENDnet User’s Guide ∙ Basic Mode of Streaming 1 and Streaming Audio/Video Setting Video SettingAudio/Video Setting Audio Setting ∙ Advanced Mode of Streaming 1 and Streaming∙ 3GPP Streaming mode Event Configuration Motion Detection Event ConfigurationEvent Configuration Motion Detection Network IP Check Event Configuration Motion Detection Record FileEvent Configuration Motion Detection Record Time Setting Event Configuration Schedule Output Test Gpio Setting Event Configuration Gpio Setting Input Setting∙ On/Off Switch mode ∙ Time Switch mode Factory DefaultHow to Access the IP camera via IP Installer Configure Ddns on your Camera How to setup/access the camera behind a RouterProtocol Select TCP Configure Ddns on your routerCamera login page will appear Hardware Technical SpecificationsVideo Features Camera Software Management InterfaceWindows XP TroubleshootingWindows Vista Forgot my password. What should I do? Limited Warranty Limited Warranty