TRENDnet Outdoor PoE Megapixel Day/Night Internet Camera, TV-IP302PI manual Protocol Select TCP

Page 37

TRENDnet User’s Guide

5.Go to Virtual Server* section and create a new entry. Enable: Click Enable

Name: Enter the application name (eg. CameraName)

Protocol: Select TCP

Private Port: The HTTP port that you assign on your Camera.

Public Port: The port used on remote side to access to your Camera.

LAN Server: The local IP address of your Camera.

Then click Add to add the application.

*Please refer to your router’s user’s manual for detail Virtual Server setting. Some router might use Port Forwarding or Special applications for this function. The setup steps should be very similar.

TV-IP302PI

6.Open another web browser and enter your DDNS domain and camera’s port number.

http://yourDomainName:PortNumber

7.Camera’s login page will appear.

Configure DDNS on your router

1.Go to Camera’s DDNS  Ports Number section, assign a HTTP port for your camera and click Apply.

2.Login to your router’s web configuration page.

© Copyright 2014 TRENDnet. All Rights Reserved.

36

Image 37

Contents TRENDnet User’s Guide Contents Features Package ContentsProduct Hardware Features Product OverviewCamera Connectors Application DiagramHardware Installation InstallationShield Installation Bracket Installation Camera InstallationLED Indicator WaterproofingTV-IP302PI TV-IP302PI Viewing Camera Basic Function Configuration     Configuring the Camera Setting System System System Information OSD SettingSystem System Information Server Information System User Management ∙ Direct Video Stream Authentication System System Information Time Setting∙ Firmware Upgrade ∙ Enable Password Protection∙ Configuration System ToolsNetwork Network Setting IPv6 Setting Network Network Setting IP Address SettingNetwork Network Setting Port Setting Network Network Setting Web AuthenticationNetwork Network Setting Rtsp Setting ∙ Rtsp Server Network Network Setting UPnP ∙ UPnP∙ Rtsp Authentication ∙ UPnP Port ForwardingNetwork Network Setting Bonjour Network Network Setting Onvif∙ Security ∙ Rtsp KeepaliveNetwork Advanced Https Network Advanced Snmp ∙ SNMPv3 ∙ SNMPv1/SNMPv2 Trap Network Advanced QoS/DSCP Network Advanced IP Address Filter∙ PPPoE Network Advanced Ieee Network PPPoE & DdnsDdns Status Network Event Server ∙ Mail Setting∙ Samba Setting ∙ FTP SettingAudio/Video Setting Image Setting TRENDnet User’s Guide ∙ Basic Mode of Streaming 1 and Streaming Audio/Video Setting Video Setting∙ 3GPP Streaming mode ∙ Advanced Mode of Streaming 1 and StreamingAudio/Video Setting Audio Setting Event Configuration Motion Detection Event ConfigurationEvent Configuration Motion Detection Record Time Setting Event Configuration Motion Detection Record FileEvent Configuration Motion Detection Network IP Check Event Configuration Schedule ∙ On/Off Switch mode Gpio Setting Event Configuration Gpio Setting Input SettingOutput Test ∙ Time Switch mode Factory DefaultHow to Access the IP camera via IP Installer Configure Ddns on your Camera How to setup/access the camera behind a RouterProtocol Select TCP Configure Ddns on your routerCamera login page will appear Video Features Technical SpecificationsHardware Camera Software Management InterfaceWindows Vista TroubleshootingWindows XP Forgot my password. What should I do? Limited Warranty Limited Warranty