TRENDnet TV-IP302PI, Outdoor PoE Megapixel Day/Night Internet Camera Event Configuration Schedule

Page 32

TRENDnet User’s Guide

Event Configuration >> Schedule

∙Schedule: Click on the week calendar to draw color. During the colored time, snapshot can be taken, and event trigger can be enabled if you do relevant settings.

∙Snapshot: Enable the snapshot function, then IP camera will take snapshot

according to schedule. Select the snapshot saving way: E-mail, FTP, or Samba.

∙Interval: The interval between two snapshots.

∙File Name: Give the snapshot file name. The saved file will be named as: "(file name) - (saving date) - (saving time)"

TV-IP302PI

Event Configuration >> GPIO Setting

1.I/O Connection

∙Please connect the GND & DO pin to the external relay (buzzer) device. When no event happens, DO output is 5V (DO and GND are disconnected). When the camera detects event happening and triggers external alarm, DO output is 0V (DO and GND are connected).

© Copyright 2014 TRENDnet. All Rights Reserved.

31

Image 32

Contents TRENDnet User’s Guide Contents Package Contents FeaturesProduct Hardware Features Product OverviewApplication Diagram Camera ConnectorsShield Installation InstallationHardware Installation Camera Installation Bracket InstallationLED Indicator WaterproofingTV-IP302PI TV-IP302PI Configuration Viewing Camera Basic Function     Configuring the Camera Setting System System Information Server Information System System Information OSD SettingSystem System System Information Time Setting System User Management ∙ Direct Video Stream Authentication∙ Enable Password Protection ∙ Firmware Upgrade∙ Configuration System ToolsNetwork Network Setting IP Address Setting Network Network Setting IPv6 SettingNetwork Network Setting Port Setting Network Network Setting Web AuthenticationNetwork Network Setting UPnP ∙ UPnP Network Network Setting Rtsp Setting ∙ Rtsp Server∙ Rtsp Authentication ∙ UPnP Port ForwardingNetwork Network Setting Onvif Network Network Setting Bonjour∙ Security ∙ Rtsp KeepaliveNetwork Advanced Https Network Advanced Snmp ∙ SNMPv3 ∙ SNMPv1/SNMPv2 Trap Network Advanced IP Address Filter Network Advanced QoS/DSCPNetwork Advanced Ieee Network PPPoE & Ddns ∙ PPPoEDdns Status ∙ Mail Setting Network Event Server∙ FTP Setting ∙ Samba SettingAudio/Video Setting Image Setting TRENDnet User’s Guide Audio/Video Setting Video Setting ∙ Basic Mode of Streaming 1 and StreamingAudio/Video Setting Audio Setting ∙ Advanced Mode of Streaming 1 and Streaming∙ 3GPP Streaming mode Event Configuration Event Configuration Motion DetectionEvent Configuration Motion Detection Network IP Check Event Configuration Motion Detection Record FileEvent Configuration Motion Detection Record Time Setting Event Configuration Schedule Output Test Gpio Setting Event Configuration Gpio Setting Input Setting∙ On/Off Switch mode Factory Default ∙ Time Switch modeHow to Access the IP camera via IP Installer How to setup/access the camera behind a Router Configure Ddns on your CameraConfigure Ddns on your router Protocol Select TCPCamera login page will appear Hardware Technical SpecificationsVideo Features Management Interface Camera SoftwareWindows XP TroubleshootingWindows Vista Forgot my password. What should I do? Limited Warranty Limited Warranty