TRENDnet Outdoor PoE Megapixel Day/Night Internet Camera, TV-IP302PI manual Ddns Status

Page 23

TRENDnet User’s Guide

Select “Enabled” to use PPPoE. Type in the username and password for the ADSL connection.

Send mail after dialed: When successfully connecting to the internet, it sends a mail to a specific mail account. As for the mail account setting, please refer to Server setting page.

∙DDNS

TV-IP302PI

This camera supports following Dynamic DNS server: Dyndns.com, 3322.org, no- ip.com and IPTECNO DDNS.

Enable DDNS, and select a DDNS provider. Some providers will ask you to register and get an account before you use their service. Fill in the user name, hostname, and password (if need). If setting up IP schedule update too frequently, the IP may be blocked. In general, we suggest set schedule update to once a day (1440 minutes). After click "Apply" the setting.

DDNS Status:

Updating: Information update

Idle: Stop service

DDNS registration successful, can now log by http://<username>.no-cp.com: Register successfully.

Update Failed, the name is already registered: The user name has already been used. Please change it.

Update Failed, please check your internet connection: Network connection failed.

Update Failed, please check the account information you provided: The server, user name, and password may be wrong.

© Copyright 2014 TRENDnet. All Rights Reserved.

22

Image 23

Contents TRENDnet User’s Guide Contents Product Overview Package ContentsFeatures Product Hardware FeaturesCamera Connectors Application DiagramShield Installation InstallationHardware Installation Waterproofing Camera InstallationBracket Installation LED IndicatorTV-IP302PI TV-IP302PI Viewing Camera Basic Function Configuration     Configuring the Camera Setting System System Information Server Information System System Information OSD SettingSystem System User Management ∙ Direct Video Stream Authentication System System Information Time SettingSystem Tools ∙ Enable Password Protection∙ Firmware Upgrade ∙ ConfigurationNetwork Network Setting Web Authentication Network Network Setting IP Address SettingNetwork Network Setting IPv6 Setting Network Network Setting Port Setting∙ UPnP Port Forwarding Network Network Setting UPnP ∙ UPnPNetwork Network Setting Rtsp Setting ∙ Rtsp Server ∙ Rtsp Authentication∙ Rtsp Keepalive Network Network Setting OnvifNetwork Network Setting Bonjour ∙ SecurityNetwork Advanced Https Network Advanced Snmp ∙ SNMPv3 ∙ SNMPv1/SNMPv2 Trap Network Advanced QoS/DSCP Network Advanced IP Address Filter∙ PPPoE Network Advanced Ieee Network PPPoE & DdnsDdns Status Network Event Server ∙ Mail Setting∙ Samba Setting ∙ FTP SettingAudio/Video Setting Image Setting TRENDnet User’s Guide ∙ Basic Mode of Streaming 1 and Streaming Audio/Video Setting Video SettingAudio/Video Setting Audio Setting ∙ Advanced Mode of Streaming 1 and Streaming∙ 3GPP Streaming mode Event Configuration Motion Detection Event ConfigurationEvent Configuration Motion Detection Network IP Check Event Configuration Motion Detection Record FileEvent Configuration Motion Detection Record Time Setting Event Configuration Schedule Output Test Gpio Setting Event Configuration Gpio Setting Input Setting∙ On/Off Switch mode ∙ Time Switch mode Factory DefaultHow to Access the IP camera via IP Installer Configure Ddns on your Camera How to setup/access the camera behind a RouterProtocol Select TCP Configure Ddns on your routerCamera login page will appear Hardware Technical SpecificationsVideo Features Camera Software Management InterfaceWindows XP TroubleshootingWindows Vista Forgot my password. What should I do? Limited Warranty Limited Warranty