TRENDnet TV-IP302PI manual Camera Installation, Bracket Installation, LED Indicator, Waterproofing

Page 6

TRENDnet User’s Guide

Bracket Installation

1.Turn and lock the bracket into the mounting hole of IP camera. Use screws to fix the bracket to ceiling or wall, and turn the knob tightly to fix the angle of camera.

LED Indicator

The green LED will be flash when power on the camera and if there is the data transmission.

LED

Waterproofing

The camera is designed featuring waterproof. However, you need to protect the connectors from water soak. For example, you can tape the junction points of the connectors while you connect the cables or purchase a weatherproof cable/power cord protector.

TV-IP302PI

Camera Installation

1.Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the Auto-Run program. Click the Install Camera.

2.Write down the MAC ID of the camera.

© Copyright 2014 TRENDnet. All Rights Reserved.

5

Image 6

Contents TRENDnet User’s Guide Contents Product Hardware Features Package Contents Features Product OverviewApplication Diagram Camera ConnectorsInstallation Hardware InstallationShield Installation LED Indicator Camera InstallationBracket Installation WaterproofingTV-IP302PI TV-IP302PI Configuration Viewing Camera Basic Function     Configuring the Camera Setting System System Information OSD Setting SystemSystem System Information Server Information System System Information Time Setting System User Management ∙ Direct Video Stream Authentication∙ Configuration ∙ Enable Password Protection∙ Firmware Upgrade System ToolsNetwork Network Setting Port Setting Network Network Setting IP Address SettingNetwork Network Setting IPv6 Setting Network Network Setting Web Authentication∙ Rtsp Authentication Network Network Setting UPnP ∙ UPnPNetwork Network Setting Rtsp Setting ∙ Rtsp Server ∙ UPnP Port Forwarding∙ Security Network Network Setting OnvifNetwork Network Setting Bonjour ∙ Rtsp KeepaliveNetwork Advanced Https Network Advanced Snmp ∙ SNMPv3 ∙ SNMPv1/SNMPv2 Trap Network Advanced IP Address Filter Network Advanced QoS/DSCPNetwork Advanced Ieee Network PPPoE & Ddns ∙ PPPoEDdns Status ∙ Mail Setting Network Event Server∙ FTP Setting ∙ Samba SettingAudio/Video Setting Image Setting TRENDnet User’s Guide Audio/Video Setting Video Setting ∙ Basic Mode of Streaming 1 and Streaming∙ Advanced Mode of Streaming 1 and Streaming ∙ 3GPP Streaming modeAudio/Video Setting Audio Setting Event Configuration Event Configuration Motion DetectionEvent Configuration Motion Detection Record File Event Configuration Motion Detection Record Time SettingEvent Configuration Motion Detection Network IP Check Event Configuration Schedule Gpio Setting Event Configuration Gpio Setting Input Setting ∙ On/Off Switch modeOutput Test Factory Default ∙ Time Switch modeHow to Access the IP camera via IP Installer How to setup/access the camera behind a Router Configure Ddns on your CameraConfigure Ddns on your router Protocol Select TCPCamera login page will appear Technical Specifications Video FeaturesHardware Management Interface Camera SoftwareTroubleshooting Windows VistaWindows XP Forgot my password. What should I do? Limited Warranty Limited Warranty