TRENDnet User’s Guide
System >> System Information >> Time Setting
∙Server Time: It shows current IP camera server time.
∙Date Format: Select the date display format.
∙Time Zone: Select your time zone. It affect server time when you use "NTP" time.
∙Enable Daylight Saving: select the start and end daylight saving time.
∙NTP: Type in the IP address of the NTP server and interval time. The time of the IP camera will be synchronized with NTP server time. To use this option, if the NTP Server is under WAN, the IP camera must be set to access WAN ( Using the WAN IP that provide by your ISP provider, or setup by UPnP Port Forwarding (page 18)
∙Synchronize with PC's time: In "Date" and "Time" column it shows your current PC time. Click "Apply" to make the IP camera time the same with PC time. Note that IP camera will not check with PC at every moment automatically. Every time
TV-IP302PI
when you want to synchronize the IP camera time with PC time again, please select this option and click "Apply".
∙Manual: Type in the date and time, and click "Apply".
System >> User Management
∙Direct Video Stream Authentication:
To steam the video directly without going through the configuration page, you can access it via Internet.
Stream 1 Video: http://camera_ip_address:port/stream1view.htm
Stream 1 Video: http://camera_ip_address:port/stream2 view.htm
© Copyright 2014 TRENDnet. All Rights Reserved.
12