TRENDnet TV-IP302PI, Outdoor PoE Megapixel Day/Night Internet Camera manual

Page 8

TRENDnet User’s Guide

7.Select "DHCP" option to assign an IP by DHCP server or Select "Fixed IP" to set IP address manually. Click Next.

8.If you select "Fixed IP", fill out the IP address, subnet mask, default gateway, DNS server. Please ensure that the IP address of the camera and the computer must within the same network. Click Next.

TV-IP302PI

9.Type in the Password. The default password is “admin”. You must change the default password of the camera. Enter the default password: admin and enter the new password. The password must be between 8 and 32 characters. (Alphanumeric: a-z, A-Z, 0-9), and confirm the new password by entering the password twice.

10.Click “here” to access to the camera’s web page or click Next. It is recommended that you access the IP camera now if it was using a DHCP connection.

© Copyright 2014 TRENDnet. All Rights Reserved.

7

Image 8

Contents TRENDnet User’s Guide Contents Package Contents FeaturesProduct Hardware Features Product OverviewApplication Diagram Camera ConnectorsShield Installation InstallationHardware Installation Camera Installation Bracket InstallationLED Indicator WaterproofingTV-IP302PI TV-IP302PI Configuration Viewing Camera Basic Function     Configuring the Camera Setting System System Information Server Information System System Information OSD SettingSystem System System Information Time Setting System User Management ∙ Direct Video Stream Authentication∙ Enable Password Protection ∙ Firmware Upgrade∙ Configuration System ToolsNetwork Network Setting IP Address Setting Network Network Setting IPv6 SettingNetwork Network Setting Port Setting Network Network Setting Web AuthenticationNetwork Network Setting UPnP ∙ UPnP Network Network Setting Rtsp Setting ∙ Rtsp Server∙ Rtsp Authentication ∙ UPnP Port ForwardingNetwork Network Setting Onvif Network Network Setting Bonjour∙ Security ∙ Rtsp KeepaliveNetwork Advanced Https Network Advanced Snmp ∙ SNMPv3 ∙ SNMPv1/SNMPv2 Trap Network Advanced IP Address Filter Network Advanced QoS/DSCPNetwork Advanced Ieee Network PPPoE & Ddns ∙ PPPoEDdns Status ∙ Mail Setting Network Event Server∙ FTP Setting ∙ Samba SettingAudio/Video Setting Image Setting TRENDnet User’s Guide Audio/Video Setting Video Setting ∙ Basic Mode of Streaming 1 and StreamingAudio/Video Setting Audio Setting ∙ Advanced Mode of Streaming 1 and Streaming∙ 3GPP Streaming mode Event Configuration Event Configuration Motion DetectionEvent Configuration Motion Detection Network IP Check Event Configuration Motion Detection Record FileEvent Configuration Motion Detection Record Time Setting Event Configuration Schedule Output Test Gpio Setting Event Configuration Gpio Setting Input Setting∙ On/Off Switch mode Factory Default ∙ Time Switch modeHow to Access the IP camera via IP Installer How to setup/access the camera behind a Router Configure Ddns on your CameraConfigure Ddns on your router Protocol Select TCPCamera login page will appear Hardware Technical SpecificationsVideo Features Management Interface Camera SoftwareWindows XP TroubleshootingWindows Vista Forgot my password. What should I do? Limited Warranty Limited Warranty