TRENDnet Outdoor PoE Megapixel Day/Night Internet Camera, TV-IP302PI manual

Page 35

TRENDnet User’s Guide

How to Access the IP camera via IP Installer

The IP Installer is an optional utility allow you to search the cameras in your network easily.

1.Insert the Installation CD-ROM into your computer’s CD-ROM drive.

2.Click Exit if the Autorun pop up.

3.Go to Start >> type in D:\\ (D: is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard .

4.Click IPInstaller Folder and click IP Installer.exe

5.The main screen will pop up.

TV-IP302PI

∙Search : Search the IP Camera within the Network

∙Access Camera: access the selected camera’s web page.

∙Change : change the selected camera’s IP address via Static IP or DHCP.

If Static is selected, you have to manual type in the IP address, Subnet Mask, Default gateway, DNS 1, DNS 2 and Http Port.

∙Exit: Exit the IP Installer Utility.

© Copyright 2014 TRENDnet. All Rights Reserved.

34

Image 35

Contents TRENDnet User’s Guide Contents Product Overview Package ContentsFeatures Product Hardware FeaturesCamera Connectors Application DiagramShield Installation InstallationHardware Installation Waterproofing Camera InstallationBracket Installation LED IndicatorTV-IP302PI TV-IP302PI Viewing Camera Basic Function Configuration     Configuring the Camera Setting System System Information Server Information System System Information OSD SettingSystem System User Management ∙ Direct Video Stream Authentication System System Information Time SettingSystem Tools ∙ Enable Password Protection∙ Firmware Upgrade ∙ ConfigurationNetwork Network Setting Web Authentication Network Network Setting IP Address SettingNetwork Network Setting IPv6 Setting Network Network Setting Port Setting∙ UPnP Port Forwarding Network Network Setting UPnP ∙ UPnPNetwork Network Setting Rtsp Setting ∙ Rtsp Server ∙ Rtsp Authentication∙ Rtsp Keepalive Network Network Setting OnvifNetwork Network Setting Bonjour ∙ SecurityNetwork Advanced Https Network Advanced Snmp ∙ SNMPv3 ∙ SNMPv1/SNMPv2 Trap Network Advanced QoS/DSCP Network Advanced IP Address Filter∙ PPPoE Network Advanced Ieee Network PPPoE & DdnsDdns Status Network Event Server ∙ Mail Setting∙ Samba Setting ∙ FTP SettingAudio/Video Setting Image Setting TRENDnet User’s Guide ∙ Basic Mode of Streaming 1 and Streaming Audio/Video Setting Video SettingAudio/Video Setting Audio Setting ∙ Advanced Mode of Streaming 1 and Streaming∙ 3GPP Streaming mode Event Configuration Motion Detection Event ConfigurationEvent Configuration Motion Detection Network IP Check Event Configuration Motion Detection Record FileEvent Configuration Motion Detection Record Time Setting Event Configuration Schedule Output Test Gpio Setting Event Configuration Gpio Setting Input Setting∙ On/Off Switch mode ∙ Time Switch mode Factory DefaultHow to Access the IP camera via IP Installer Configure Ddns on your Camera How to setup/access the camera behind a RouterProtocol Select TCP Configure Ddns on your routerCamera login page will appear Hardware Technical SpecificationsVideo Features Camera Software Management InterfaceWindows XP TroubleshootingWindows Vista Forgot my password. What should I do? Limited Warranty Limited Warranty